« previous next »
Pages: [1]   Go Down

Author Topic: 357 max barrel  (Read 858 times)

0 Members and 1 Guest are viewing this topic.

Offline Fortkevin2

  • Trade Count: (43)
  • Avid Poster
  • **
  • Posts: 227
  • Gender: Male
357 max barrel
« on: September 03, 2009, 02:24:22 AM »
I'm about to pick one of these up(hopefully). Any idea how they shoot? I shoot a whole lot of 38 special(have 3000 158gr LSWC loaded now..) and I think it would be a fun barrel. I shot a buddy 357 max out of his TC and it was great. Anyone have one and can give me some more info on how they shoot?
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: 357 max barrel
« Reply #1 on: September 03, 2009, 03:08:33 AM »
I was reluctant to ream my .357 because it shot mags and .38s wonderfully.  I got a second .357, also a shooter, and reamed the first.  It didn't change a thing.  It's a tack driver.  The .38s shoot a little high at .38 range, but group well.  I love the versatility of the rifle, and you will too.  Go for it :D

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline Fortkevin2

  • Trade Count: (43)
  • Avid Poster
  • **
  • Posts: 227
  • Gender: Male
Re: 357 max barrel
« Reply #2 on: September 03, 2009, 03:32:49 AM »
Thanks Pete! I shoot a lot of 38's because they are cheap to reload and shoot great in my S&W Model 10. my plan is to put a 4x on the handi and I think it will be a great shooter. Anyone else have experience?
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: 357 max barrel
« Reply #3 on: September 03, 2009, 06:28:59 AM »
I put a red dot on mine.  It's not MOA with it, but you get fast target acquisition, shoot with both eyes open and don't loose your target, especially in woods.  It's "minute of deer".  Simply great in low light.  You don't have to center anything.  The dot is where the bullet goes, and it is very fast.  I've got two now, and will eventually put them on all the short range rifles, .445 Super Mag, .30-30, .357, etc.  If you want a hundred fifty yard tack driver, it's not for you.  I have other rifles and scopes that will do that as far as you can see.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline Fortkevin2

  • Trade Count: (43)
  • Avid Poster
  • **
  • Posts: 227
  • Gender: Male
Re: 357 max barrel
« Reply #4 on: September 03, 2009, 07:07:19 AM »
Hmmm Well hopefully it will be good for shooting at the range too. My buddy has a tc with a tc custom shop 357 max($350+!!! just for the barrel  :o  ) and we shoot the steel rams at 200 yards with it all day. Hopefully we can get some loads to work for it because otherwise I will never hear the end of it for being cheap and not getting a tc! When you say it's not a tack driver do you mean with the red dot you have or just the barrel in general?
Logged

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Re: 357 max barrel
« Reply #5 on: September 03, 2009, 07:57:21 AM »
 Which red dot are you using on the handi Petemi? Boy wants one on the .44 handi

Lonny
Logged

Offline Datil

  • GBO Supporter
  • Trade Count: (17)
  • Senior Member
  • *****
  • Posts: 1822
  • Gender: Male
Re: 357 max barrel
« Reply #6 on: September 03, 2009, 08:31:49 AM »

 FortKevin2
 
 If that Maxie doesn't range the rams bell I'll be surprized !!! Just work up some good loads.
 Some guys on here use 180 grain bullets and accurate 1680 Powder, having good results.
 Datil
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: 357 max barrel
« Reply #7 on: September 03, 2009, 09:33:25 AM »
The barrel/rifle is superb.  The red dot is too large and covers too much of the target to be MOA.  One of the guys here suggested sighting in at the edge of the red dot at 6 o'clock and it would work well.  I haven't tried it yet.

Both of the ones I'm playing with are cheap ones, till I learn more about them.  The .44 wears a TruGlow 5 MOA dot and the .357 an A1 Optic 4 MOA dot.  So far, they both work well and stand up to recoil.  They're both under 50 bucks, so if they crap out, I'm not out much.  All I can say is try one.  If it's junk, chuck it.  They've got about a hundred rounds each under them and doing well.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: 357 max barrel
« Reply #8 on: September 03, 2009, 11:08:44 AM »
Quote from: Datil link=topic=181904.msg 1098884945#msg 1098884945 date=1252002709

 Fort Kevin2
 
 If that Maxie doesn't range the rams bell I'll be surprised !!! Just work up some good loads.
 Some guys on here use 180 grain bullets and accurate 1680 Powder, having good results.
 Datil

 Mine is a factory H&R maxi barrel. It shoots 180 Hornady's at 2200fps and shoots under an inch @ 100 yards. I also had TWO maxi contender barrels, while both where accurate, neither would shoot as well as my Handi. Mine shoots mags very well and 38 spls minute of beer can @ 25yards. Plenty accurate for my nieces and nephews to stay interested. In maxi its downed over a dozen deer, all I can remember where bang flops. Mine wears an old M8 Leupold 3X with a german #1 reticule.

Here she is with my 454 casull handi in gray stocks. The maxi is the mannlicher stocked handi.




Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: 357 max barrel
« Reply #9 on: September 03, 2009, 11:14:06 AM »
I have a 357 that I reamed to Max. I am shooting a lot of 148 grain HBWC in mine. I am getting very good accuracy out of it. I was shooting 2.6 grains of Bullseye. I have now stepped it up to 3 grains. I did that so POI did not shift so much between the 357 Max and the Wad Cutters. I use the 38 Specials with the Wad Cutters for backyard pests. It is low noise and enough power at short ranges to be lethal. I have shot 5 'coons, 2 skunks and a couple of chipmunks. No misses so far. I probably could have shot more, but my wife did not want me to until the pests started to dig up her flowers. After the second time, she said she wanted them %#*# 'coons dead. I obliged her. The skunks and 'coons have literally roto-tilled the back yard. My 357 is wearing a 2.5X Tasco shot gun scope. I have two of them, but they are discontinued now. I can make 1 ragged hole at 25 yards with the Wad Cutters and shoot about 1.5 MOA with 357 Max and 180 grain bullets. I think I could do better, if I fully bedded the fore end and did a little more load development. I just have not got around to it yet. Mine shoots 125 grain Remington SJHP fairly well too. I get around 2300 fps and they too make 1 ragged hole at 25 yards. I tried to up the velocity of the 125 grainers, but the accuracy went South, so 2300 for works for me and they still make a mess out of any thing they hit. No ricochets here. Good Luck and Good Shooting
Logged
Great men have vision and resolve to make dreams come true.

Offline tcjason

  • Trade Count: (9)
  • Member
  • *
  • Posts: 30
Re: 357 max barrel
« Reply #10 on: September 03, 2009, 01:05:33 PM »
cw, neat load area you got, wish I could keep mine so tidy.
Logged

Offline Datil

  • GBO Supporter
  • Trade Count: (17)
  • Senior Member
  • *****
  • Posts: 1822
  • Gender: Male
Re: 357 max barrel
« Reply #11 on: September 03, 2009, 01:14:27 PM »

 C W That is a old model hammer you have on the Maxie, You can not a hammer spur on it can you?
 
 Marv.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: 357 max barrel
« Reply #12 on: September 03, 2009, 01:28:05 PM »
Marv,

I have an old style low hammer on my 35 Whelen Improved, had to trim the back edge of the barrel release to clear it.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: 357 max barrel
« Reply #13 on: September 03, 2009, 02:52:47 PM »
Quote from: Datil on September 03, 2009, 01:14:27 PM

 C W That is a old model hammer you have on the Maxie, You can not a hammer spur on it can you?
 
 Marv.

I could put one on, if there was a clearance issue, a quick trim like Tim mentioned would work nicely. But It really dosen't need it.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Fortkevin2

  • Trade Count: (43)
  • Avid Poster
  • **
  • Posts: 227
  • Gender: Male
Re: 357 max barrel
« Reply #14 on: September 04, 2009, 03:49:07 AM »
I've been looking for frames for barrel I just bought. Should I just go and by a SB2 45-70 and use that frame or should I go buy a shotgun for $107? Will the SB1 frame handle the pressure of the 357 max? I'm in college and money is tight so I'd rather go the cheaper route but I'm not sure if that would be the right way to go about it.
Logged

Offline wreckhog

  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 2997
Re: 357 max barrel
« Reply #15 on: September 04, 2009, 04:04:51 AM »
Quote from: Fortkevin2 on September 04, 2009, 03:49:07 AM
I've been looking for frames for barrel I just bought. Should I just go and by a SB2 45-70 and use that frame or should I go buy a shotgun for $107? Will the SB1 frame handle the pressure of the 357 max? I'm in college and money is tight so I'd rather go the cheaper route but I'm not sure if that would be the right way to go about it.
CW's maxi is on a case hardened frame in the pic above. Unless it is off a less common BC SB2, I assume that it is an SB1.
Logged

Offline Fortkevin2

  • Trade Count: (43)
  • Avid Poster
  • **
  • Posts: 227
  • Gender: Male
Re: 357 max barrel
« Reply #16 on: September 04, 2009, 05:41:55 AM »
Gotcha, so yes or no too the sb1 receiver? I understand that the shotgun sb1 receivers weren't case hardened therefore you can't have anything but shotgun barrels and 357 mag and 44 mag on them. Would the 357 max's pressures be too high for that frame?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: 357 max barrel
« Reply #17 on: September 04, 2009, 06:57:48 AM »
There have been a couple that have done the Max rechamber on an SB1 with no problems, primer issues would be the problem most likely to occur, so be alert to that if you do one, several members including myself have experienced perforated primers with the Max on SB1 frames, mine were with Dan Wesson factory ammo.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline gatersb

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 123
  • Gender: Male
Re: 357 max barrel
« Reply #18 on: September 04, 2009, 09:07:07 AM »
Yall are contagious now i want to send my 410 tamer out for a 357 mag barrel just would like to get it back.  Will see what the wife has to say on the money front  ;D
Logged
Pages: [1]   Go Up
« previous next »