Author Topic: Will H&R fit a 45LC to a Buffalo Classic frame? (Read 956 times)

TopperT · « **on:** January 12, 2009, 09:32:33 AM »

Just wondering....seems like they would

. Also, anyone shooting this round, especially with Black Powder?

? I've been thinking about this and having both a rifle and pistol in the same caliber.......might be fun. Lord this really does NEVER end does it?

brennemanj83 · « **Reply #1 on:** January 12, 2009, 09:37:43 AM »

Sounds like Jims addicted...............one thing I've learned since I signed up here its a never ending process.

Will H&R fit a 45LC to a Buffalo Classic frame?

Yes as long as its a H&R.They wont fit it to a Wesson & Harrington.

TopperT · « **Reply #2 on:** January 12, 2009, 09:39:19 AM »

Jon....why is that?

petemi · « **Reply #3 on:** January 12, 2009, 09:42:53 AM »

Seems to me it's an SB2 frame and they can fit anything to it. Guys, if I'm wrong, holler.

You're a diseased person. Only one cure, get more Handis.

Good luck,

Pete

quickdtoo · « **Reply #4 on:** January 12, 2009, 09:43:43 AM »

The CR-45LC comes on an SB2 rifle frame, the BC frame is just faux case colored. They won't fit any barrels to any Wesson & Harrington frame tho, they have no record of when they were made, the info was lost in the move to Ilion. Until I learn otherwise(I'm waitng for a reply now) the 45LC accessory barrel requires a 1999 or later frame even tho it's not an * marked barrel.

I shot mine as a 45 Colt with a couple loads, 250gr Speer and 250gr SST, both at about 1900fps, but it has since become a 460S&W.

Tim

http://www.hr1871.com/Firearms/Rifles/buffalo.asp

TopperT · « **Reply #5 on:** January 12, 2009, 09:52:38 AM »

WOW......BIG PROBLEM FOR MOI!!!!! If H&R will NOT fit anything to a Wesson & Harrington frame I am so screwed and so is Jon's dad.....heres why. I was JUST about to send off my 38-55 Barrel to Jon's dad and then send in my frame for a fir for a 45-70......now I'm thinking that IF I remove the barrel and sell it I have no chance of having the factory fit a new barrel either 45 Long Colt or 45-70 Buffalo Classic!!!!!!!!

TopperT · « **Reply #6 on:** January 12, 2009, 10:02:33 AM »

I should explain....I HAVE 3 38-55's (don't ask why....I just do

) Two Wesson & Harringtons and one H&R version.

My #1 rifle (named Woodrow Call) 'Old Scout" fixed up and it shoots sweet.

I just bought a second Wesson and Harrington from TOTW but it needs to have the chamber "corrected". This I was going to send to Jon's dad and then send in the frame to H&R to have it fitted for 45-70...ya I know convoluted but this is me........go figure

...(too much wine when surfing one night for sure on that purchase).

I have a third, this one is a H&R version and its in CA at Richard Clark's shop and was....(hes not feeling well) going to be cut back to 24" for a 38-55 Hunting Classic. I just sent him word to call off the cut-back when he feels better and just fix the chamber and install the steel trigger guard. I love 'Old Scout' by the way...a real American hero in my book.

Now I'm VERY weary of selling off the W&H Barrel because I'll not get Factory assistance in fitting barrels........oh crap!!!!!

....I promissed to sell it off nbut I feel like I'd be cutting my own throat.....so to speak......crap

quickdtoo · « **Reply #7 on:** January 12, 2009, 10:03:08 AM »

Call them and ask, maybe they found the lost documentation on those frames, they use to fit them at Gardner.

Tim

brennemanj83 · « **Reply #8 on:** January 12, 2009, 10:07:25 AM »

Hey Jim.....if you want to keep the barrel do so............its no big deal.

TopperT · « **Reply #9 on:** January 12, 2009, 10:12:27 AM »

Jon I feel like a horses ass........... This is all so new to me. I will try to find out about this however.

Chas. · « **Reply #10 on:** January 12, 2009, 10:32:00 AM »

Quote from: TopperT on January 12, 2009, 09:32:33 AM

I've been thinking about this and having both a rifle and pistol in the same caliber.......might be fun.

You're going backwards. You need to go forward. I thought the same thing and just bought a BFR single-action in 45-70 to go with my BC.

brennemanj83 · « **Reply #11 on:** January 12, 2009, 10:44:07 AM »

Hey Chas hows the recoil of tha BFR.............Been looking at em at my local dealer.Sure has been calling my name.

Chas. · « **Reply #12 on:** January 12, 2009, 11:48:12 AM »

Don't have it yet. Bud's sent me a notice today that payment has been received and order has been moved to shipping. Hopefully by the end of the week.

45-70.gov · « **Reply #13 on:** January 12, 2009, 12:08:37 PM »

i don't like that barrel swapping thing

just get a new whole gun...leave old stuff intact

do they still make the 20in 45 colt BC with the strait stock
they used to any way

if not get the 32 inch 45-70 and sent it in for 45 colt

45-70.gov · « **Reply #14 on:** January 12, 2009, 12:27:37 PM »

http://www.gboreloaded.com/forums/index.php/topic,161703.0.html

but i bet you read this too

Chas. · « **Reply #15 on:** January 22, 2009, 09:40:16 AM »

Quote from: brennemanj83 on January 12, 2009, 10:44:07 AM

Hey Chas hows the recoil of tha BFR.............Been looking at em at my local dealer.Sure has been calling my name.

Finally got it and finally got to shoot it today. Shoots like a very heavy load 44 mag. on steroids. I was shooting my trapdoor loads - 405gr cast, 31 gr. H4198. I shot it 10 times and had to put it down. I could have shot it more(after a bit of stress rest), but I had some other guns I wanted to shoot. I thought I had cured my flinch, but now it's back.

Blackhawker · « **Reply #16 on:** January 22, 2009, 09:54:23 AM »

If this is covered down the line...sorry. I only got about halfway down and I thought I'd add this comment.

I called H&R some time ago about the Target Classic (38-55 while they were still producing them) and asked if a 45-70 barrel could be fitted to it. The answer was "no". The tech I spoke with recommended me to buy a 45-70 Buffalo Classic and then have the 38-55 barrel fitted to it. I still to this day don't know why. The tech said that the 38-55 Target Classic frame wasn't as strong as the BC frame. At the time I didn't know of the SB-1/SB-2 designations, had I known, I would have asked if the TC is on a SB-1 frame, which is what I believe the tech was incinuating.

Is this true?? If so, TopperT, you might not want to put a 45-70 barrel on that target classic (if what I'm reading is correct)

??

quickdtoo · « **Reply #17 on:** January 22, 2009, 10:31:13 AM »

Quote from: Blackhawker on January 22, 2009, 09:54:23 AM

I called H&R some time ago about the Target Classic (38-55 while they were still producing them) and asked if a 45-70 barrel could be fitted to it. The answer was "no". The tech I spoke with recommended me to buy a 45-70 Buffalo Classic and then have the 38-55 barrel fitted to it. I still to this day don't know why. The tech said that the 38-55 Target Classic frame wasn't as strong as the BC frame. At the time I didn't know of the SB-1/SB-2 designations, had I known, I would have asked if the TC is on a SB-1 frame, which is what I believe the tech was incinuating.

Is this true?? If so, TopperT, you might not want to put a 45-70 barrel on that target classic (if what I'm reading is correct)

??

No, it's not true unless you're referring to a Wesson and Harrington 38-55 frame which they won't fit any barrel to now, Gardner would, but Ilion won't unless they have found the W&H serial number build year info that was lost in the move from Gardner to Ilion. The H&R 38-55 Target uses the same SB2 frame as the Buffalo Classic, whom ever told you that misunderstood the question, or was just plain wrong. They also won't fit a 45LC barrel to any SB2 frame made before 1999.

Tim

45-70.gov · « **Reply #18 on:** January 22, 2009, 11:20:03 AM »

Quote from: 45-70.gov on January 12, 2009, 12:08:37 PM

i don't like that barrel swapping thing

just get a new whole gun...leave old stuff intact

do they still make the 20in 45 colt BC with the strait stock
they used to any way

if not get the 32 inch 45-70 and sent it in for 45 colt

i held the 20 inch colt 45 BC just last sunday at the shot show
they still making them same stock and case colar as the 45-70

Blackhawker · « **Reply #19 on:** January 23, 2009, 08:33:09 PM »

Quote from: quickdtoo on January 22, 2009, 10:31:13 AM

Quote from: Blackhawker on January 22, 2009, 09:54:23 AM

I called H&R some time ago about the Target Classic (38-55 while they were still producing them) and asked if a 45-70 barrel could be fitted to it. The answer was "no". The tech I spoke with recommended me to buy a 45-70 Buffalo Classic and then have the 38-55 barrel fitted to it. I still to this day don't know why. The tech said that the 38-55 Target Classic frame wasn't as strong as the BC frame. At the time I didn't know of the SB-1/SB-2 designations, had I known, I would have asked if the TC is on a SB-1 frame, which is what I believe the tech was incinuating.

Is this true?? If so, TopperT, you might not want to put a 45-70 barrel on that target classic (if what I'm reading is correct)

??

No, it's not true unless you're referring to a Wesson and Harrington 38-55 frame which they won't fit any barrel to now, Gardner would, but Ilion won't unless they have found the W&H serial number build year info that was lost in the move from Gardner to Ilion. The H&R 38-55 Target uses the same SB2 frame as the Buffalo Classic, whom ever told you that misunderstood the question, or was just plain wrong. They also won't fit a 45LC barrel to any SB2 frame made before 1999.

Tim

Thanks Tim. That's kind of what I thought....I guess the tech was just plain wrong. This was before I owned my Wesson and Harrington and was looking to buy a new rifle. At the time I couldn't decide on the 38-55 or the 45-70 to start with.
...It wouldn't be the first time I got incorrect info from some of the H&R techs, unfortunately.

I'm glad you cleared that up for me as well as everyone else and Topper T. I wouldn't want anyone to be misled by me original post.