Author Topic: barrels for.223 varmint rifle  (Read 1134 times)

0 Members and 1 Guest are viewing this topic.

Offline rzwieg

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 217
  • Gender: Male
barrels for.223 varmint rifle
« on: October 17, 2004, 07:39:40 PM »
I am interested in re-barreling a Rem. 700 in .223 BUT don't want the wallet ripped off my rear. Anyone have experience with E.R.Shaw?

Offline Coal River Rat

  • Trade Count: (0)
  • Member
  • *
  • Posts: 59
Barrel for 223
« Reply #1 on: October 18, 2004, 05:38:52 PM »
I have no experience with Shaw Barrels, although I have heard conflicting reports about quality and service from people that have bought barrels from them, to be honest I dont think there is a barrel company that everyone is happy with 100% of the time. Too often the bad experiences is all you here, mad people are most likely the loudest. With that said, here's my 2 cents; Douglas Barrels are reasonably priced and the quality is high. Last year I bought the Douglas XX Premium/Chrome-moly in a 22", #3 contoured barrel for a Rem. 308 custom rifle. This gun consistantly shoots .4s or better(3 shot groups @ 100yds.) with its pet hunting load. Needless to say I'm very happy with Douglas. Another company with a very strong following is Pac-Nor Barrels, their Super Match grade is said to be the way to go with them. Check prices, not only barrels but the gunsmithing services as well. Sometimes the cheapest route in the beginning is not the cheapest at the end. Do your homework and you'll end up being satisfied with the end result. Oh, I almost forgot. Don't forget to ask about their turnaround times, some 'smiths and barrel makers may say 8-12 weeks up front and really mean months. This situation can make you wish you would've spent more money with another barrel maker.  Good Luck and Good Shooting!

Offline Catfish

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2696
barrels for.223 varmint rifle
« Reply #2 on: October 19, 2004, 10:42:19 AM »
I have neve had a Shaw barrel eather. I have had 3 Dougles barrels though. 2 were good shooters right off, the other took alot of work befor it came around. I think alot of the problem with the 3 rd. barrel was the gun smith that put it on the action. The guy had a good rep., but he did 2 jobs for me and screwed them both up. I recently bought a shotgun he had worked on and it was screwed up too. I never would have got it if I would have known he had worked on it, but I do have it shooting where I want it and will get it back to working properly without the junk I have on it now. Dougles makes a real good barrel for the money and from what I hear so does Shaw.

Offline George Foster

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 396
barrels for.223 varmint rifle
« Reply #3 on: October 20, 2004, 12:28:09 AM »
I had ERShaw rebarrel a 788 in 6mm for me in 1999.  I am very pleased with the barrel and I have been every since I started shooting it.  It cost me about $300 for everything which included bluing of the barrel and action.  I broke the barrel in as they told me to and it will shoot the 85HPBT into five shot groups of 5/8" if I am doing my part correctly.  They told me it would take about 12 weeks and that is what it did take.
Good Shooting,
George

Offline rzwieg

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 217
  • Gender: Male
barrels for.223 varmint rifle
« Reply #4 on: December 27, 2004, 07:31:12 AM »
Thanks for the advise. Haven't been online for awhile.

Offline manitou210

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
barrel
« Reply #5 on: March 01, 2006, 08:36:28 AM »
take a look at this site:wwwhartbarrels.com I have used them for many years, they do fine work and I have never seen any bad fead back on there barrels or work about 12 weeks turnaround time