I've been researching these things since the 1960s. Listen and learn.
And I am sure you have a personal email or a reference to prove this?
Gee, from your post I though big Green weighed every bullet and then before they put the powder in the case they adjusted the specific powder weight to compensate for bullets being plus or minus a given weight.
Knowing production procedures on how companies streamline to go from production directly to packaging, I just don't buy the "big hopper" story.
I have bought one box of commercial ammo in 46 years because I bought a new piece of crap Rem 700 in 243 that would not group inside 3 inches until I did a barrel change, trued the action, and lapped the lugs. I bought that box of commercial ammo to see if all the cases, powders, bullets (70 to 105gr) and primers I loaded were wrong, but the Rem factory ammo was just as bad as my reloads. After the barrel change it became an accurate rifle but the $725 cost of the above was equal to the cost of the original rifle. I will never buy another Remington, despite the other 2 that I own were quite accurate out of the box. The Rem - from my perspective has a 66% success rate. Hell I had better luck getting Rugers and Winchesters, and old sporterized 1903 Springfields to shoot accurately -- they were all 100% inside 1 MOA.
Prior to that -- 46 years ago when I was starting reloading -- I used to disassemble and weigh different factory ammo and was not impressed with Rem (or Win or Fed) quality standards. They all sucked! While I understand they have improved quality control - from different web postings/forums - I am not inclined to waste good money just to verify.
My one real question for you -- are you a paid Remington shill or do you just do this for free?
Barstooler