« previous next »
Pages: [1]   Go Down

Author Topic: 445 sm question  (Read 458 times)

0 Members and 1 Guest are viewing this topic.

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
445 sm question
« on: August 24, 2011, 09:18:54 AM »
How does 44 mag loads shoot after you ream out to 445 sm.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: 445 sm question
« Reply #1 on: August 24, 2011, 10:33:57 AM »
Jason,
 
In keeping with the tradition of this forum I will offer advice and not attempt to answer your question. ::) ::)   Considering the limited availability of the 445SM brass and the fact you have a 44mag and 444m why not leave your 44Mag intact and then you can just download your 444M if you want to shoot 445SM loads?  I am leaving my house now before I am tarred & feathered by the 445SM fanatics. ;)
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline phatgemi

  • GBO Supporter
  • Trade Count: (4)
  • Avid Poster
  • *****
  • Posts: 139
Re: 445 sm question
« Reply #2 on: August 24, 2011, 01:02:33 PM »
Well I will break tradition and give you info that you requested. I find that my handi does just fine with the .44 after reaming to .445. no problems at all. Don't let the naysayers talk you out of trying it if you want something different. Yes brass has been difficult at times to find but it is available right now from several sources. Buy a hundred and you will be set for a long time. The .445 is a fine round.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: 445 sm question
« Reply #3 on: August 24, 2011, 01:06:35 PM »
I think you'll find that any rechamber done with a good rifle reamer(which my 445 reamer is) as opposed to a cylinder reamer will improve the accuracy of the shorter rounds due to the throat it cuts.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 445 sm question
« Reply #4 on: August 24, 2011, 01:52:46 PM »
The reamers for 445sm and 454 casul l are being sent in mail tomorrow I found brass for both already thought about doing the k hornet to but I am going to contact rcbs about sending my dies back first
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 445 sm question
« Reply #5 on: August 24, 2011, 02:02:40 PM »
Only thing I need to know is my 44 is a factory gun on sb1 frame, going to 445sm do I need to put it on an sb2 frame now
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: 445 sm question
« Reply #6 on: August 24, 2011, 02:17:04 PM »
Quote from: Jason F on August 24, 2011, 02:02:40 PM
Only thing I need to know is my 44 is a factory gun on sb1 frame, going to 445sm do I need to put it on an sb2 frame now


I would recommend that you do. Then again, I just don't see a need for a SB1 frame.




Thanks, Dinny
Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 445 sm question
« Reply #7 on: August 24, 2011, 02:19:59 PM »
I will just use the frame for something else or get rid of it,thanks for the info.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: 445 sm question
« Reply #8 on: August 24, 2011, 04:04:23 PM »
Quote from: Jason F on August 24, 2011, 02:02:40 PM
Only thing I need to know is my 44 is a factory gun on sb1 frame, going to 445sm do I need to put it on an sb2 frame now

If you want to use full pressure loads, I would, you can get by with mid level loads tho.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: 445 sm question
« Reply #9 on: August 25, 2011, 03:42:35 AM »
Don't hesitate to ream it.  Mine is an older over-bored barrel, reamed for me by Tim.  I just load .433 GCs from Montana Bullet Co. for the SM, but it still shoots factory mags just fine.  I too found brass fairly easily.  The first batch was made from .30-40 brass and needed the rim trimmed.  The rest was new Starline.  I have mine on a SB2 frame, and I have some loads that kill on both ends.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491
Pages: [1]   Go Up
« previous next »