« previous next »
Pages: [1]   Go Down

Author Topic: Torque value on synthetic forend  (Read 832 times)

0 Members and 1 Guest are viewing this topic.

Offline barm

  • Trade Count: (0)
  • Member
  • *
  • Posts: 88
Torque value on synthetic forend
« on: February 23, 2010, 03:11:22 AM »
I bought the Choate conventional forend to replace my wooden forend.  I checked the FAQ's and I could not find a torque value for the forend.  I called Choate and they told me 50 in/lbs, but that sounds high.  It appears to be all plastic, does it have metal in the plastic?  I was thinking 26-30 in/lbs.  What do you all think?
Logged

Offline sgtt

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 556
Re: Torque value on synthetic forend
« Reply #1 on: February 23, 2010, 05:24:49 AM »
A couple of weeks ago this crossed my mind.  I took my 45-70 to the range and ran a test.  I shot a group each at 10-20-30-40-50-60 in/lbs each.  50 was the best of all the groups.  My testing is not scientific at all.  I would assume that there may be some variation in each rifle. 
Logged
"Freedom, for some, is problematic.  It does not grant emancipation from responsibility."

Offline barm

  • Trade Count: (0)
  • Member
  • *
  • Posts: 88
Re: Torque value on synthetic forend
« Reply #2 on: February 23, 2010, 05:58:35 AM »
Sgtt,

Did you have the synthetic or the wood forend?  Thank you for the information on your test.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Torque value on synthetic forend
« Reply #3 on: February 23, 2010, 06:09:27 AM »
What works on one won't necessarily work on another, the most common torque term used is "snug", the most important issue is to make it the same each time once you find the sweet spot, I've been using 24 in/lbs for years on all of mine, I've used up to 60 in/lbs, but on wood forends it may crush the wood eventually.  ;)

Tim

http://www.gboreloaded.com/forums/index.php/topic,134749.msg1098514087.html#msg1098514087
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline barm

  • Trade Count: (0)
  • Member
  • *
  • Posts: 88
Re: Torque value on synthetic forend
« Reply #4 on: February 23, 2010, 06:49:14 AM »
Many thanks Tim.
Logged

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Re: Torque value on synthetic forend
« Reply #5 on: February 23, 2010, 05:03:11 PM »
So is the fat wrench a real tool that will give an accurate repeatable results? -g
Logged
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Torque value on synthetic forend
« Reply #6 on: February 23, 2010, 06:05:50 PM »
Mine works fine, I think the much more expensive Uticas are probably more durable, but for the cost, the FAT wrench is a good choice. There are some less expensive alternatives tho as shown in the FAQs.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline sgtt

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 556
Re: Torque value on synthetic forend
« Reply #7 on: February 24, 2010, 03:21:52 AM »
I used the Fat wrench.  The forend is the synthetic that came with the rifle.  There are so many variables to the "game". 
Logged
"Freedom, for some, is problematic.  It does not grant emancipation from responsibility."

Offline blind ear

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4156
  • Gender: Male
    • eddiegjr
Re: Torque value on synthetic forend
« Reply #8 on: February 24, 2010, 07:58:11 AM »
When I get a riifle shooting like I wan't it to, I make a very slight mark on one end of the forearm screw slot, slight but unmistakable, and match a mark to it on the forearm or stock. Then when I don't have a torque wrench, which i seldom do, I "feel" torque it back to match the marks. Works well enough for me or my guns accuracy. eddie
Logged
Oath Keepers: start local
-
“It is no coincidence that the century of total war coincided with the century of central banking.” – Ron Paul, End the Fed
-
An economic crash like the one of the 1920s is the only thing that will get the US off of the road to Socialism that we are on and give our children a chance at a future with freedom and possibility of economic success.
-
everyone hears but very few see. (I can't see either, I'm not on the corporate board making rules that sound exactly the opposite of what they mean, plus loopholes) ear
"I have seen the enemy and I think it's us." POGO
St Judes Childrens Research Hospital

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Re: Torque value on synthetic forend
« Reply #9 on: February 24, 2010, 06:19:16 PM »
I'm tired of guessing on the forend and rings tightness. I ordered a Fat Wrench lastnight and we'll see how it works out for the family. -g
Logged
"In God We Trust - Everyone else keep you hands where I can see them!"
Pages: [1]   Go Up
« previous next »