« previous next »
Pages: [1]   Go Down

Author Topic: handi 30-06 loads  (Read 452 times)

0 Members and 1 Guest are viewing this topic.

Offline bubba

  • Trade Count: (62)
  • Senior Member
  • *****
  • Posts: 1898
  • Gender: Male
handi 30-06 loads
« on: January 14, 2010, 06:24:30 AM »
I just purchased a brand new 30-06 handi.  scope base extension and an extractor.  I am looking for some places to start for reloading with 125 grain and 150 grain bullets.  Any information would be appreciated.  Also has anyone switched over to the limbsaver recoil pad? If so how did it work out?  Thanks in advance
Logged
”A gun is like a parachute. If you need one, and don’t have one, you’ll probably never need one again.”

Molon Labe

Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline rickt300

  • Trade Count: (13)
  • Senior Member
  • *****
  • Posts: 2937
Re: handi 30-06 loads
« Reply #1 on: January 14, 2010, 06:58:17 AM »
Mine liked 165 gr. Ballistic Tips and a load of H414 a couple grains under maximum. You will probably find that 1 grain of powder will be the difference between a really good group and a 2 1/2 inch group.
Logged
I have been identified as Anti-Federalist, I prefer Advocate for Anarchy.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: handi 30-06 loads
« Reply #2 on: January 14, 2010, 07:12:57 AM »
Can't help ya with the '06 loads, but I have several Limbsaver pads on both synthetic and wood stocks, they're my favorite.  ;)

Tim

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bubba

  • Trade Count: (62)
  • Senior Member
  • *****
  • Posts: 1898
  • Gender: Male
Re: handi 30-06 loads
« Reply #3 on: January 14, 2010, 07:21:28 AM »
Thanks Tim,  WHich one is fo rthe wooden stock if you dont miind my asking
Logged
”A gun is like a parachute. If you need one, and don’t have one, you’ll probably never need one again.”

Molon Labe

Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: handi 30-06 loads
« Reply #4 on: January 14, 2010, 07:40:22 AM »
Those prefits that are close are listed in the FAQs, but the small grind-to-fit works well after a little sanding on the belt sander.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: handi 30-06 loads
« Reply #5 on: January 14, 2010, 10:41:18 AM »
My 30-06 (and 30-40 Krag) shoot well with 150-220 gr. cast lead gas check bullets driven by 16.0 of IMR 4227. I could drive them faster, but these do all I need and are easy to live with. I dont use jacketed so I cant help there.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
Re: handi 30-06 loads
« Reply #6 on: January 14, 2010, 10:46:49 AM »

My handi 30-06 seem to favor IMR 4350 and IMR 3031
3031 with 165 hornady SP 44.5
The picture in IMR 4350 165 grain Remington core-lock 100 yards from the bench both loads about 20 thou of the lands
Logged

Offline PowPow

  • Trade Count: (16)
  • Senior Member
  • *****
  • Posts: 1838
  • Gender: Male
Re: handi 30-06 loads
« Reply #7 on: January 14, 2010, 01:47:33 PM »
30-06; 125 gr Sierra PH; CCI BR-2 primer, 57.5 gr H380, 3.19" OAL, Rem Brass. .36" group 3 shot @ 100 yds.
Logged
The difference between people who do stuff and people who don't do stuff is that the people who do stuff do stuff.
Pages: [1]   Go Up
« previous next »