« previous next »
Pages: [1]   Go Down

Author Topic: handi won't cock  (Read 912 times)

0 Members and 1 Guest are viewing this topic.

Offline Dirty Tiger

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 116
handi won't cock
« on: January 13, 2010, 03:35:43 AM »
I've seen this post before,but couldn't seem to find it with the forum search. Anyway with the help from Quick I was able to get the 45/70 barrel fitted to my frame. Now it wont cock. Tried backing off the stock screw, nothing. Any ideas? The barrel latches nicely with what seems to be the right amount of play in the release. I gave my original barrel back to the gunsmith to get a dovetail for a front sight cut, so I can't try that one on for a test.
Logged

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: handi won't cock
« Reply #1 on: January 13, 2010, 04:08:29 AM »
Are you saying it won't cock with out a bbl on it? Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: handi won't cock
« Reply #2 on: January 13, 2010, 04:11:19 AM »
Try cocking the frame without a barrel on it and see what you get.  If it won't cock witht he barrel on it and does with no barrel, most likely the release lever isn't coming up high enough.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline Dirty Tiger

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 116
Re: handi won't cock
« Reply #3 on: January 13, 2010, 05:03:02 AM »
Barrel on or off still won't cock. Was working fine before I took it to gunsmith to try to fit barrel. Took him 3 mounths to tell me it wasn't gung to work. Then with help from the board it took almost 5 minutes to get it fitted and closing. Now this cocking issue has popped up. Looks like I may need to push out some pins and see if its gotten some fillings or crud hung up somewhere. So I guess it's not like the Encores and Contenders that need to have a barrel latched up to cock.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: handi won't cock
« Reply #4 on: January 13, 2010, 05:59:04 AM »
If you haven't already, download Perklo's trigger hone instructions and make sure the hammer and trigger parts are all there and installed correctly.  ;) I'd double check the stock bolt, remove it completely and make sure it's not the problem first, if the bolt is too long, even backing it out a little may not be enough.

Tim

www.perkloafm.com
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Dirty Tiger

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 116
Re: handi won't cock
« Reply #5 on: January 13, 2010, 06:39:19 AM »
The stock bolt was the trick. I'll shim it with a drilled out 3/8 bolt or cut off the bolt if i have enough threads. Thanks Quick
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: handi won't cock
« Reply #6 on: January 13, 2010, 06:49:33 AM »
Metric washers or just buy a 4" long 3/8"-24 cap screw.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline tmccray45

  • GBO Supporter
  • Trade Count: (9)
  • Avid Poster
  • *****
  • Posts: 115
Re: handi won't cock
« Reply #7 on: January 13, 2010, 10:07:26 AM »
Quote from: quickdtoo on January 13, 2010, 06:49:33 AM
Metric washers or just buy a 4" long 3/8"-24 cap screw.

Tim

Quick:

I've checked both Home Depot and Lowes - neither carries the 3/8x24 bolt.   Where's a good place to find one?

Thanks.
Logged
"Work: The New Retirement"

Offline blind ear

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4156
  • Gender: Male
    • eddiegjr
Re: handi won't cock
« Reply #8 on: January 13, 2010, 11:29:43 AM »
Could have picked up the washers while at the hardware and be through with it. 5 washers will cost less than 1 bolt. And Quick said it will work! (PS:I usually do things the hard way also.) eddie
Logged
Oath Keepers: start local
-
“It is no coincidence that the century of total war coincided with the century of central banking.” – Ron Paul, End the Fed
-
An economic crash like the one of the 1920s is the only thing that will get the US off of the road to Socialism that we are on and give our children a chance at a future with freedom and possibility of economic success.
-
everyone hears but very few see. (I can't see either, I'm not on the corporate board making rules that sound exactly the opposite of what they mean, plus loopholes) ear
"I have seen the enemy and I think it's us." POGO
St Judes Childrens Research Hospital

Offline aflineman

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 149
  • Gender: Male
Re: handi won't cock
« Reply #9 on: January 13, 2010, 12:10:35 PM »
Quote from: tmccray45 on January 13, 2010, 10:07:26 AM
Quote from: quickdtoo on January 13, 2010, 06:49:33 AM
Metric washers or just buy a 4" long 3/8"-24 cap screw.

Tim

Quick:

I've checked both Home Depot and Lowes - neither carries the 3/8x24 bolt.   Where's a good place to find one?

Thanks.
Around here Ace, the local Farmers Co-op, or the really local place called Handyman Hardware has it. Handyman has kept in business because they carry MANY things that Lowes and Home Depot do not. You may have somewhere traditional like that where you are from.
Logged
Have lights? Thank a Lineman!

Offline zoner

  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 1322
Re: handi won't cock
« Reply #10 on: January 13, 2010, 12:14:08 PM »
i'd add a washer...try it....add another if necessary...try it...you shouldnt need much
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: handi won't cock
« Reply #11 on: January 13, 2010, 12:20:12 PM »
NAPA Auto Parts usually has a good selection of very good quality bolts. Also check your yellow pages for Fastenal. They have everything and way cheaper than stores.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: handi won't cock
« Reply #12 on: January 13, 2010, 04:12:09 PM »
Quote from: tmccray45 on January 13, 2010, 10:07:26 AM
Quick:

I've checked both Home Depot and Lowes - neither carries the 3/8x24 bolt.   Where's a good place to find one?

Thanks.

Both Ace and True Value have them here. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline tmccray45

  • GBO Supporter
  • Trade Count: (9)
  • Avid Poster
  • *****
  • Posts: 115
Re: handi won't cock
« Reply #13 on: January 15, 2010, 02:13:07 AM »
Quote from: quickdtoo on January 13, 2010, 04:12:09 PM
Quote from: tmccray45 on January 13, 2010, 10:07:26 AM
Quick:

I've checked both Home Depot and Lowes - neither carries the 3/8x24 bolt.   Where's a good place to find one?

Thanks.

Both Ace and True Value have them here. ;)

Tim

Quick is, once again, da bomb!

Dropped by my Ace Hardware and, after going up and down the isle several times, there they were!   $1.50 later and I was out the door.

Thanks for the heads-up.
Logged
"Work: The New Retirement"
Pages: [1]   Go Up
« previous next »