« previous next »
Pages: [1]   Go Down

Author Topic: Survivor Strippers ? :)  (Read 861 times)

0 Members and 1 Guest are viewing this topic.

Offline Default

  • Classified -- Banned
  • Trade Count: (13)
  • A Real Regular
  • *
  • Posts: 766
  • Gender: Male
Survivor Strippers ? :)
« on: May 18, 2009, 07:03:30 PM »
 So now that I have the new survivor stock on the 44 mag , I'm in a little bit of a bind ... I had recalled a product made by "?" (didnt remember) that held 6 rimmed rounds on a flat strip, some what like a stripper clip used by many nations over the years for the rimmed revolver cartridges ... Well now that I have some research under my belt I find that it is bianchi that makes the http://www.copsplus.com/prodnum2876.php
 which are the Bianchi 580 Speed Strips for the 38/357 rounds , Which is exactly what I had in mind for the 44 mag survivor in the stock but so far no avail on ones for the 44 spcl/mag ... So those that wanted some other way to store your 357 mag ammo in your 357 survivor other then that ugly spandex sleeve now have this to chew on ;)
 I tried some of the stippers I had around the house for various other calibers...Only one that was even close was the SKS stripper that was pretty damn close I might add , And by the way the SKS stripper clip works perfect for 10 rounds of 357 mag  :D so that is a cheaper remedy for you all that wanted a easier way to pocket a hand full of 357's without buying the bianchi stripper ..

 I have an old military canvas belt with sewn in belt hoops that work fine for the big mags but i cant find a way to getit into the stocks compartment ... So the question is this ...Has anyone found a good idea for packing in the larger calibers for this stock... I know the 308 is one of the standard cal. for this from the factory so I know someone has had to address this before me ;D so fess up ... how did you remedy not just tossing loose rounds into the survivor stock ?

  Hope this helps someone and hopefully someone has some help to offer ,

      Default

 After thought :   I thought about the bullet wallet too , but since i couldnt fold the loaded canvas belt in half and get it to fit .. I'm greatly doubting the bullet wallet would fair any better..
Logged
"Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free." ~Ronald Reagan

THE QUICKEST WAY TO ENSLAVE A PEOPLE IS TO DISARM THEM ~ George Mason

Offline Default

  • Classified -- Banned
  • Trade Count: (13)
  • A Real Regular
  • *
  • Posts: 766
  • Gender: Male
Re: Survivor Strippers ? :)
« Reply #1 on: May 18, 2009, 07:47:48 PM »
HA Think I found the solution for the 44 Mag clips ... Now I just have to go to my buddies house and try his SMLE stripper clips for that Enfield he has   Wo0t   ;D   ;D   ;D   Have i ever mentioned how much I LUB Teh NET ??  ;D   ;D

  Default

Logged
"Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free." ~Ronald Reagan

THE QUICKEST WAY TO ENSLAVE A PEOPLE IS TO DISARM THEM ~ George Mason

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Survivor Strippers ? :)
« Reply #2 on: May 19, 2009, 05:24:38 AM »
The "ugly" spandex sleeve works for me cause I have a second shot in my hand before I pull the trigger if I think I may need it.  All my single shots wear them.  I'd use the butt stock cartridge holders and leave the room in the stock for something useful........like venison jerky ;)

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: Survivor Strippers ? :)
« Reply #3 on: May 19, 2009, 05:40:36 AM »
I feel better now that I have read the post. ;) I thought there for a minute that we were talking about strippers and how they survived ;D :D :D

Like Pete, I use the spandex type to carry spares in - I think it is Allen brand and they hold 9 cartridges. Along with the one the chamber, about all I need to have with me at a time.
Logged
Great men have vision and resolve to make dreams come true.

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Survivor Strippers ? :)
« Reply #4 on: May 19, 2009, 06:03:30 AM »
Quote from: LaOtto222 on May 19, 2009, 05:40:36 AM
I feel better now that I have read the post. ;) I thought there for a minute that we were talking about strippers and how they survived ;D :D :D

Like Pete, I use the spandex type to carry spares in - I think it is Allen brand and they hold 9 cartridges. Along with the one the chamber, about all I need to have with me at a time.

La Otto, they're Allen 206s and they work great.  They hold everything from .45-70 and .410, 357s, down to the .22 centerfires.

I guess I don't want to be clatching around in a box looking for a second shot; ugly or not.  I've got a buddy, cigar smoker, simply replaces his cigar with another round.  He has a hard time lighting it though ;D


Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline Default

  • Classified -- Banned
  • Trade Count: (13)
  • A Real Regular
  • *
  • Posts: 766
  • Gender: Male
Re: Survivor Strippers ? :)
« Reply #5 on: May 19, 2009, 07:01:56 AM »
 Well of course the spandex shell holders are handy ... Fugly as sin but yes functional  .. I was thinking along the lines of the nature of a Survivor type rifle ;) And yes i will be picking up the allens 206

 
Quote from: LaOtto222 on May 19, 2009, 05:40:36 AM
I feel better now that I have read the post. ;) I thought there for a minute that we were talking about strippers and how they survived ;D :D :D

Like Pete, I use the spandex type to carry spares in - I think it is Allen brand and they hold 9 cartridges. Along with the one the chamber, about all I need to have with me at a time.

 And dont underestimate those surviving strippers , they might be packing handis too ;)
 
 But for those times when its more convenant to have the ammo in the stock for say travel or actually using the rifle in a long term storage situation for the just incase survivor rifle scenerio , Bush pilots etc.
 these clips may be quite a useful item versus loose rounds
 Just thinking about it you know , and wanted an answer to the question before the need may arise or is in my lap ...

 But of course you have to have room for the Jerky , thats why i need the clips .. Dont want my mash'd taters invading my greenbeans perimeter , and i wont stand for it with my jerky and bullets either  :D

      Default

  P.S  Survivor Strippers Packing Handi's    Hmmmmmm  I might be onto something here boys  ...  Calenders ANYONE ??  HeH
Logged
"Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free." ~Ronald Reagan

THE QUICKEST WAY TO ENSLAVE A PEOPLE IS TO DISARM THEM ~ George Mason

Offline jlwilliams

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1321
Re: Survivor Strippers ? :)
« Reply #6 on: May 19, 2009, 08:23:13 AM »
  I had a pouch on my 45/410 survivor that opened up to two rows of shell holders.  Kind of cumbersome but it worked, also had a compartment where I kept the choke& the choke key along with spare batteries for the red dot.

  If you want to put a few rounds in a stripper clip inside the stock you can use either the Enfield or the Russian Mosin Nagant clips.  Both have bases close enough to the 44 magnum base.

  A better option, in my opinion, is the little cordura 'wallet' style round holders.  The strippers are good when they are full, but they don't hold the rounds snug once you pull one or two out.  You can put the folded round holder in the stock, or on a sling.  On the sling makes them a little easier to get at.  The stock is best used for a few items you may need but don't use while shooting, in my opinion.
Logged

Offline 45-70.gov

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 7009
  • Gender: Male
Re: Survivor Strippers ? :)
« Reply #7 on: May 19, 2009, 08:37:49 AM »
i  just cut bicycle  inner tubes  a few inches  long
and slip  them over the barrel or forend

then slip a few rounds under  the  bands

2 foward 2  backwards   under the barrel ahead of the forend  or

one each left and right where  the barrel and forend meet

see  what works  for  you      i  like it  better  than  on  the shoulderstock carriers  as  i shoot either handed
Logged
when drugs are outlawed only out laws will have drugs
DO WHAT EVER IT TAKES TO STOP A DEMOCRAT
OBAMACARE....the biggest tax hike in the  history of mankind
free choice and equality  can't co-exist
AFTER THE LIBYAN COVER-UP... remind any  democrat voters ''they sat and  watched them die''...they  told help to ''stand down''

many statements made here are fiction and are for entertainment purposes only and are in no way to be construed as a description of actual events.
no one is encouraged to do anything dangerous or break any laws.

Offline Default

  • Classified -- Banned
  • Trade Count: (13)
  • A Real Regular
  • *
  • Posts: 766
  • Gender: Male
Re: Survivor Strippers ? :)
« Reply #8 on: May 19, 2009, 11:10:26 AM »
thanks JLW ,

 I hadnt thought of the nagant stripper clips , Yeah they should be close ...As for the bullet wallet it wont work folded over , the 44s are to wide ...
 I would think the 357 and 223 would be able to use it but not the 44 the width isnt there for those big round ... Thats why i figured the single stack clips to be a good route.

 
 45Gov ... That rubber barrel band doesnt mess with your accuracy brother ?

 Have to admit i hadnt thought of tryin that ... I was thinking about a bandolier sling ... Already have a military belt with hoops , dont know if i want to make into a sling of find a nice leather one with big hoops.


       default
Logged
"Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free." ~Ronald Reagan

THE QUICKEST WAY TO ENSLAVE A PEOPLE IS TO DISARM THEM ~ George Mason

Offline 45-70.gov

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 7009
  • Gender: Male
Re: Survivor Strippers ? :)
« Reply #9 on: May 19, 2009, 01:24:41 PM »
not shot  them enough to tell if it hurts accuacy

good point

only used it for yard pest.....quiet 38 loads  or shot shell  2 each  ready to go by the dresser
Logged
when drugs are outlawed only out laws will have drugs
DO WHAT EVER IT TAKES TO STOP A DEMOCRAT
OBAMACARE....the biggest tax hike in the  history of mankind
free choice and equality  can't co-exist
AFTER THE LIBYAN COVER-UP... remind any  democrat voters ''they sat and  watched them die''...they  told help to ''stand down''

many statements made here are fiction and are for entertainment purposes only and are in no way to be construed as a description of actual events.
no one is encouraged to do anything dangerous or break any laws.

Offline mike4

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 135
Re: Survivor Strippers ? :)
« Reply #10 on: May 19, 2009, 06:28:56 PM »
i got tired of those ugly socks not fitting 223 cases and made this instead
Logged

Offline Default

  • Classified -- Banned
  • Trade Count: (13)
  • A Real Regular
  • *
  • Posts: 766
  • Gender: Male
Re: Survivor Strippers ? :)
« Reply #11 on: May 19, 2009, 09:34:03 PM »
Mike ,
 I have thought of those but hadnt found a manufacurer that offered one yet ... My other half has a cousin that does leather work and i have been considering letting him work me one up .. Pretty good looking bullet sleeve you have there i might add  ;)


   Default
Logged
"Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free." ~Ronald Reagan

THE QUICKEST WAY TO ENSLAVE A PEOPLE IS TO DISARM THEM ~ George Mason

Offline Default

  • Classified -- Banned
  • Trade Count: (13)
  • A Real Regular
  • *
  • Posts: 766
  • Gender: Male
Re: Survivor Strippers ? :)
« Reply #12 on: May 20, 2009, 07:02:09 AM »
 Well on the subject of leather buttstock covers I found this site     

  http://www.levergunleather.com/p_buttstock_covers.htm


 Thought my handi brother might find this interesting too ;)


  Default

   Really like the dark tanned one but would preffer the the lighter tanned one caliber configuration
Logged
"Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free." ~Ronald Reagan

THE QUICKEST WAY TO ENSLAVE A PEOPLE IS TO DISARM THEM ~ George Mason

Offline Bladeforger

  • GBO Supporter
  • Trade Count: (3)
  • Member
  • *****
  • Posts: 81
Re: Survivor Strippers ? :)
« Reply #13 on: May 20, 2009, 02:49:50 PM »
Quote from: mike4 on May 19, 2009, 06:28:56 PM
i got tired of those ugly socks not fitting 223 cases and made this instead

There I was sliding down the slippery slope to ruination thinking about all those strippers and spandex... then there's this cool project.  Great job, Mike!!!


Logged

Offline mike4

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 135
Re: Survivor Strippers ? :)
« Reply #14 on: May 20, 2009, 04:21:38 PM »
thanks the best part is that it fits 223 17 fireball and 357 38 shells all in one
Logged
Pages: [1]   Go Up
« previous next »