Author Topic: ruger m77 mark 2 target/varmint .243 (Read 1877 times)

josebd · « **on:** August 17, 2006, 03:34:46 PM »

how good are these?i need some opinions please,thanks!

Coyote Hunter · « **Reply #1 on:** August 17, 2006, 07:19:16 PM »

My .22-250 ran 0.50" for 4 shots at 200 yards - using the load I developed for my Svage 110...

Cecil · « **Reply #2 on:** August 18, 2006, 03:47:43 AM »

Coyote Hunter If you don't mind me asking what's your load. I am working up loads for Ruger 22-250 target my self, thanks

josebd · « **Reply #3 on:** August 19, 2006, 04:49:48 AM »

i chronied a load i started with,h4895 36.5 65 vmax,3229 hornady book shows 36.9 to be 3400 i shot 3 times at 87 yards grouped .209

Coyote Hunter · « **Reply #4 on:** August 19, 2006, 07:27:28 AM »

Quote from: Cecil on August 18, 2006, 03:47:43 AM

Coyote Hunter If you don't mind me asking what's your load. I am working up loads for Ruger 22-250 target my self, thanks

Federal brass @ 1.902"
CCI 250 primer
35.0g Varget
COL 2.350"

Hornady 52g BTHP = 3706fps
50g Hornady V-MAX = 3697fps

I also us Speer 52g BTHP's but don't have chrono data for the Ruger VT.

Cecil · « **Reply #5 on:** August 20, 2006, 04:24:57 AM »

Thanks Coyote Hunter, I will give these a try.

Author Topic: ruger m77 mark 2 target/varmint .243 (Read 1877 times)

josebd

ruger m77 mark 2 target/varmint .243

Coyote Hunter

Re: ruger m77 mark 2 target/varmint .243

Cecil

Re: ruger m77 mark 2 target/varmint .243

josebd

Re: ruger m77 mark 2 target/varmint .243

Coyote Hunter

Re: ruger m77 mark 2 target/varmint .243

Cecil

Re: ruger m77 mark 2 target/varmint .243