« previous next »
Pages: [1]   Go Down

Author Topic: Hogue overmold stocks  (Read 661 times)

0 Members and 1 Guest are viewing this topic.

Offline doorgunner

  • Trade Count: (0)
  • Member
  • *
  • Posts: 83
Hogue overmold stocks
« on: February 26, 2006, 05:13:15 PM »
Does anyone have any experience with Hogue Overmold stocks on their rifles?

I've used H-S Precision on several of my Remington 700's with good results.  I have two brand new Ruger M77 All Weather rifles (25-06 & 30-06).  I'm tinkering with the idea of trying out a Hogue on the 30-06.  I've dumped a bunch of coin on rifles, optics, etc..  It's a little lean right now, so I'm exploring the Hogue potential.

Please, I don't need the "save your money and buy a McMillan" response.  Been there, done that!  I just need to know if anyone has had any good or bad experiences with the Hogue.

Thanks!
Logged
"Walk Softly, and Carry a Large Caliber Bolt Gun!"

Offline bluebayou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1216
  • Gender: Male
Hogue overmold stocks
« Reply #1 on: February 27, 2006, 03:59:12 PM »
I would like to hear some feedback too.  For $99 it sounds like a good deal.  Fiberglass and pillar bedding beats the factory tupperware for sure.  I have heard complaints that the forearm is too wide and that the surface is tacky to the touch.  I don't have McMillan or even HS Precision type money either.  The Hogue sounds good, but no one that I know has one.
Logged

Offline bluebayou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1216
  • Gender: Male
Hogue overmold stocks
« Reply #2 on: February 27, 2006, 04:00:29 PM »
I would like to hear some feedback too.  For $99 it sounds like a good deal.  Fiberglass and pillar bedding beats the factory tupperware for sure.  I have heard complaints that the forearm is too wide and that the surface is tacky to the touch.  I don't have McMillan or even HS Precision type money either.  The Hogue sounds good, but no one that I know has one.  FWIW-A guy at work had one for the 10/22 and liked it better than the laminate one before that.  Said it was lighter but still pretty rigid.
Logged

Offline Thebear_78

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1006
Hogue overmold stocks
« Reply #3 on: February 27, 2006, 04:31:02 PM »
I have used two of them.  They are very comfortable stocks, I had one on a Ruger 77 in 35 whelen and a winchestger model 70 in 375 H&H.   Accuracy was excellent adn ergonomics were ery good.  The onlyh compliant I can come up with is that they are fairly heavy, around 3 pounds for the aluminum blcok stock.
Logged

Offline doorgunner

  • Trade Count: (0)
  • Member
  • *
  • Posts: 83
Hogue overmold stocks
« Reply #4 on: February 27, 2006, 05:51:10 PM »
Did the barrels free float when you installed the barreled action in the stock?  I would imagine it would be difficult to open up the barrel channels, with that rubber attached to the stock body.
Logged
"Walk Softly, and Carry a Large Caliber Bolt Gun!"

Offline arkhillbilly

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
Hogue overmold stocks
« Reply #5 on: March 17, 2006, 05:02:33 PM »
i just put one on my 10/22, the barrel is free floated and it has a really nice rubbery feel to it just like their handgun grips do.  I've already noticed an improvement in accuracy
Logged
...Although there are others whose judgment upon you must pass, the fellow whose verdict counts most in your life is the man staring back from the glass...
Pages: [1]   Go Up
« previous next »