« previous next »
Pages: [1]   Go Down

Author Topic: Anyone own a custom made T /C barrel??  (Read 1742 times)

0 Members and 1 Guest are viewing this topic.

Offline upnorth

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 292
Anyone own a custom made T /C barrel??
« on: October 24, 2005, 11:00:55 AM »
Hey folks, looking for some help. I'm considering purchasing one of E.A. Brown's custom encore barrels in 7-08. Does anyone have one of their custom barrels, and how is the accuracy in it. Am also considering other barrel manufacturers so please feel free to suggest another manufacturer.I'm looking for the good, bad and the ugly on all of them!  the help is greatly appreciated. :D
Logged
you wanna take my guns? go ahead, it's your arm!

Offline reelhook

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 157
custom tc barrels
« Reply #1 on: October 24, 2005, 12:10:57 PM »
I won VV, Bullberry and tc custom. All are good and like all, you can get a bad one now and then. I feel that they aare al better that stock barrels. The new OTT will be my next. You will need to get trigger work done and possible a new hindge pin. Check back threads for more information.
Logged

Offline Encore28

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 332
Anyone own a custom made T /C barrel??
« Reply #2 on: October 24, 2005, 03:46:45 PM »
I own two Fox Ridge barrels and wouldnt trade either one---------My 209x50 was a stock barrel from E.Arthur Brown and it is a shooter also.
My latest barrel(.257 Roberts)shoots subMOA!!!!
Mike in Oregon is selling stock T/C barrels that he goes over first to ensure accuracy-I may go this route for my next barrel-----Because I know there will be a next barrel!!!!! :grin:
Encore28
Logged
T/C---One Perfect Shot

TCA Member

Offline coyote 2

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 152
    • http://spaces.msn.com/members/schwager/
Anyone own a custom made T /C barrel??
« Reply #3 on: October 24, 2005, 06:01:07 PM »
I  purchased a 1" X 20" Bullberry barrel in the 223. I think they are one of the finest. They are not cheap by any means but well worth the money. Could not be happier. I am sure there are other custom barrel makers out there - that make great barrels - Bullberry is my only experience.

http://www.bullberry.com/index.html
Logged
Don't cry because its over - Smile because it happened!

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Anyone own a custom made T /C barrel??
« Reply #4 on: October 25, 2005, 03:45:58 AM »
I believe that "custom" barrels from EAB are just barrels that came from Fox Ridge.....which make them basically factory barrels. I own several custom barrels.....VVCG, Bullberry and I have one on the way from MGM. Depending on who you are and your past experiences true custom barrels are either the best thing since sliced bread or over priced tent stakes. The fact I have one on the way should tell you what I think.
Logged

Offline upnorth

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 292
Anyone own a custom made T /C barrel??
« Reply #5 on: October 25, 2005, 11:32:53 AM »
Thanks. please keep the opinions coming. According to their website, ea brown makes their "custom" barrels from raw blanks.  Anyone have different info? Also, what kind of wait times are there on bullberry barrels? are they in stock, or a one at a time order?
Logged
you wanna take my guns? go ahead, it's your arm!

Offline Encore28

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 332
Anyone own a custom made T /C barrel??
« Reply #6 on: October 25, 2005, 02:53:36 PM »
I have heard EABCO gets their custom guns from Fox Ridge-I do not know if it is true or not?????
Bullberry makes good custom barrels-Pricey but good.
Virgin Valley has been reopened by Steve(matchgrademachine.com). VV always made good barrels-again they are pricey also.
"The guy in Oregon" buys stock T/C barrels then goes over them(fixes throats and crowns as needed)He charges around $290 for these barrels he goes over------This sounds like a good deal to get a "almost" custom barrel for under $300.
Hope I helped you out????
Encore28
Logged
T/C---One Perfect Shot

TCA Member

Offline upnorth

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 292
Anyone own a custom made T /C barrel??
« Reply #7 on: October 25, 2005, 04:38:00 PM »
So, only 3 reputable company's actually make barrels, and one guy goes over factory barrels and smooths out the rough spots. Is this correct?
Logged
you wanna take my guns? go ahead, it's your arm!

Offline poncaguy

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2751
  • Gender: Male
Anyone own a custom made T /C barrel??
« Reply #8 on: October 25, 2005, 05:08:33 PM »
Fox Ridge 460 S&W 15"...........very accurate...I'm pleased.
Logged

Offline TnEncore

  • Trade Count: (0)
  • Member
  • *
  • Posts: 72
Anyone own a custom made T /C barrel??
« Reply #9 on: October 25, 2005, 11:18:28 PM »
I think eabco has there own line of custom barrels( always heard they was made by Virgin Valley, eabco said they didn't. I don't know) they also sell T/C custon shop barrels too. I have two T/C custom shop bareels and they are good barrels.
Logged

Zero

  • Guest
Anyone own a custom made T /C barrel??
« Reply #10 on: October 26, 2005, 10:43:12 AM »
:lol: 14 Years ago, EAB custom barrels were made by Bullberry..
I have a 6mm TCU 15" barrel made by them...Do not know
if Eben still uses Bullberry or not...... :D
Logged

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Anyone own a custom made T /C barrel??
« Reply #11 on: October 27, 2005, 03:36:58 AM »
The fact is that NONE of them actually make barrels. They (SSK,VVCG, Bullberry, Van Horn, MGM ) all purchase rifled barrel stock...blanks if you will. They chamber them, dovetail them, drill/tap them for mounts and sell them as barrels they "make". The blanks come from Shilen, Douglas or whereever.....people who actually "make" barrels.
Logged

Offline upnorth

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 292
Anyone own a custom made T /C barrel??
« Reply #12 on: October 27, 2005, 11:35:28 AM »
Ah-ha. that makes more sense. so with all your guys and gals experiences, who has the best quality control on their barrels? I'm kind of leaning more towards a bullberry now that an eabco barrel.
Logged
you wanna take my guns? go ahead, it's your arm!

Offline 1stshot

  • Trade Count: (0)
  • Member
  • *
  • Posts: 35
  • Gender: Male
custom bbls.
« Reply #13 on: October 29, 2005, 05:42:09 PM »
i've had three total:
1. 300 sav. 14" from "ssk"
2. .22hornet 18" tapered from "texas contender"
3. 30-30 win. 24" bull from "texas contender"
 sold the ssk to a bud who wanted it real bad! shot 1" groups and was great fun.
22hornet still have shoots sub-1" all day as long as you do your part.
30-30 sent to bullberry rechambered it to 30-40AI. still got. i love it! deer hate it! so far 3 shots...3 deer all neck shots and in the last 20 yrs i haven't needed mor than 1 shot. don't take runnin shots! haven't needed to! i hunt better,more ethical & more patience with age i guess! but it also helps knowing anatomy of the game hunted!
Logged

Offline shootdonniebrook

  • Trade Count: (0)
  • Member
  • *
  • Posts: 87
Anyone own a custom made T /C barrel??
« Reply #14 on: October 31, 2005, 01:51:22 PM »
I have a 26" s/s tappered barrel made by VVCG for my encore. It's chambered for the weatherby 270 mag. It's just awesome. It will tear bullet holes all day with factory ammo
Logged

Offline fortress49

  • Trade Count: (9)
  • Avid Poster
  • **
  • Posts: 186
Anyone own a custom made T /C barrel??
« Reply #15 on: November 01, 2005, 03:43:27 AM »
So who is "the guy in Oregon"?  Any web address?  Company name?

Matt
Logged

Offline upnorth

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 292
Anyone own a custom made T /C barrel??
« Reply #16 on: November 01, 2005, 10:48:08 AM »
can anyone advise on wait times from bullberry? EABCO is up to 12 weeks.
Logged
you wanna take my guns? go ahead, it's your arm!

Offline Encore28

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 332
Anyone own a custom made T /C barrel??
« Reply #17 on: November 01, 2005, 01:59:31 PM »
Quote from: fortress49
So who is "the guy in Oregon"?  Any web address?  Company name?

Matt






You have mail
Logged
T/C---One Perfect Shot

TCA Member

Offline coyote 2

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 152
    • http://spaces.msn.com/members/schwager/
Anyone own a custom made T /C barrel??
« Reply #18 on: November 02, 2005, 04:04:54 AM »
Quote
can anyone advise on wait times from bullberry?

about the same 12 to 16 weeks... :(
Logged
Don't cry because its over - Smile because it happened!

Offline doc-and

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 438
Anyone own a custom made T /C barrel??
« Reply #19 on: November 11, 2005, 12:27:05 AM »
There's also a company called "ON TARGET TECHNOLOGIES" that's is making super accurate barrels for sometime now.  I have barrels from Fox Ridge, EABCO, VV & Bullberry.  But I think my next barrel will be from OTT.

Check out his webb site

http://www.ottllc.com/

docand 8)
Logged

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Anyone own a custom made T /C barrel??
« Reply #20 on: November 11, 2005, 03:08:34 AM »
I just recieved my new .204 Ruger barrel from Match Grade Machine. This thing looks excellent...hope it shoots as well. Ordered it on Oct. 10 and recieved last night....one month.
Logged

Offline mbp708

  • Trade Count: (9)
  • Avid Poster
  • **
  • Posts: 127
Anyone own a custom made T /C barrel??
« Reply #21 on: November 11, 2005, 05:03:12 PM »
Check with Match Grade Machine they have some barrels in inventory ( no wait time). I believe there were a couple of 7-08 barrels.

skb2706, Got a 21" 300 Savage Contender barrel from MGM couple of weeks ago. Getting around .5" to .75" groups with the first handload I tried. Already ordered another barrel from them for my Encore. Mike
Logged
Pages: [1]   Go Up
« previous next »