« previous next »
Pages: [1]   Go Down

Author Topic: getting the creep out of a rem. 700 trigger  (Read 566 times)

0 Members and 1 Guest are viewing this topic.

Offline thelaw

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 220
getting the creep out of a rem. 700 trigger
« on: June 28, 2005, 03:18:30 PM »
the trigger weight is fine and crisp now that i have it adjusted, but how do i get rid of what feels like about 1/8" of trigger creep?
Logged

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
getting the creep out of a rem. 700 trigger
« Reply #1 on: June 28, 2005, 03:50:11 PM »
turn in the sear engagement screw on the back. Make sure it won't slam fire when you throw the bolt closed.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline texagun

  • Trade Count: (0)
  • Member
  • *
  • Posts: 98
getting the creep out of a rem. 700 trigger
« Reply #2 on: June 30, 2005, 06:24:45 AM »
Quote from: Nobade
turn in the sear engagement screw on the back. Make sure it won't slam fire when you throw the bolt closed.


That is exactly right.  Cock the unloaded rifle and turn the sear engagement screw in until the pin falls...then back off about 1/3 turn.  Play with it until you get the creep out.  You may have to increase the pull weight again to get a safe trigger.  BE SURE AND RUN ALL THE SAFETY CHECKS...Rapidly cock the bolt several times and make sure the trigger doesn't release....cock it, put the safety on, try to pull the trigger several times, release the safety and make sure the pin doesn't drop.  Bang the butt of the cocked rifle on the floor several times to make sure the pin doesn't drop.  Anytime you mess with the sear engagement screw...PERFORM ALL THE REQUIRED SAFETY CHECKS BEFORE LOADING.
Logged

Offline firstshot

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 241
  • Gender: Male
getting the creep out of a rem. 700 trigger
« Reply #3 on: June 30, 2005, 01:28:20 PM »
thelaw

Check out the instructions at the link below.  These are what I used.

http://quarterbore.com/library/articles/rem700trigger.html



firstshot
--------------------------------------
Make your first shot count!
Logged
Life is too short to hunt with an ugly gun !!

Offline Steelbanger

  • GBO Supporter
  • Trade Count: (15)
  • Contributor
  • *****
  • Posts: 379
getting the creep out of a rem. 700 trigger
« Reply #4 on: June 30, 2005, 02:24:51 PM »
Frank DeHaas' book, published some years back by Digest Books, "Bolt Action Rifles", gives details on trigger adjustments for quite a few models. Most of these are probably dated but very informative as to the correct procedures. The Rem 700 is among the rifles covered.
Logged
"He who has gone, so we but cherish his memory, abides with us, more potent, nay, more present, than the living man."
Antoine de Saint-Expuéry

Steelbanger, NRA Life

Marlin - a hard habit to break.

Offline Ramrod

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1440
getting the creep out of a rem. 700 trigger
« Reply #5 on: June 30, 2005, 03:52:35 PM »
:D texagun, good advice, you named all the standard the saftey checks. Everyone should know these things before they mess with their trigger, but it is a sad fact that alot of folks don't.
Logged
"Jesus died for somebody's sins, but not mine." Patti Smith

Offline thelaw

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 220
getting the creep out of a rem. 700 trigger
« Reply #6 on: June 30, 2005, 05:11:43 PM »
ramrod,

sad huh, well i followed the directions just as they were given. i guess you know it all then.
Logged

Offline kyhunter308

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
getting the creep out of a rem. 700 trigger
« Reply #7 on: July 09, 2005, 01:49:05 PM »
:)  :)  :)
Logged
Pages: [1]   Go Up
« previous next »