If I could only spend all my time on these projects instead of rudely getting interupted for work and such.
I have the scope mounted, the trigger set, and all systems go. First cleaning and shots have 1/2" groups at 50 yards. I am still cleaning between each shot for breakin purposes, and am still checking/tightening things. I won't get back to shooting until early next week, but I think this will shoot well when everyhing wiggles in and is tight. I suspect 1/2 inch groups at 100 yards are going to be easy. This is from an inexpensive gun.
The gun cost $220 new, Tasco World Class 4-16X50 was $70. Rings to fit the supplied Weaver bases cost $20. The Rifle Basix sear was $70. Installing and adjusting the sear took about an hour. Installing the scope was about the same. For $380 and a couple hours of enjoyable work I have a rifle that will shoot with anyone.
The comparable CZ I looked at prior to starting on this project was $375. It had a sporter barrel and was blued and wood. Had I added the same scope it would have been $465. This Savage is stainless and synthetic (weather proof) and has a bull barrel. Both rifles are imports (eastern Europe for CZ and Canada for the Savage).
Was this a good purchase? So far so good. I plan on using this one plenty this spring and summer on the farm. Gophers and Chucks are going to have a hard time.
BTW, the Rifle Basix sear made this work. The original sear gave me a 6+ pound pull with at least 3/16 creep. At least the creep was smooth. The new sear adjusts to no creep and 1 1/2 pound pull. The trigger is now as good as any trigger I have used in a modern rifle. This is not a drop in trigger but it doesn't take a smith to install it. And Bob at Rifle Basix is most helpful.