« previous next »
Pages: [1]   Go Down

Author Topic: Has anyone converted a 357 Mag Handi into a 357/44 B&D?  (Read 706 times)

0 Members and 1 Guest are viewing this topic.

Offline briannmilewis

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 1017
  • Gender: Male
Has anyone converted a 357 Mag Handi into a 357/44 B&D?
« on: April 05, 2012, 08:12:26 PM »
Just wondering if anyone has done the rechamber of a 357 Mag Handi to 357/44 B&D?

It does the same job as a 357 Maxi and 35 Rem, with much cheaper brass.

357 Max - Remington $30/100

35 Remington - Remington $63/100

44 Mag - Starline $20/100
Logged

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: Has anyone converted a 357 Mag Handi into a 357/44 B&D?
« Reply #1 on: April 05, 2012, 08:38:44 PM »
That would be a neat little project
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: Has anyone converted a 357 Mag Handi into a 357/44 B&D?
« Reply #2 on: April 05, 2012, 09:08:23 PM »
Brass is cheaper but the gun is alot less versatile. :-\
 
 
 
Spanky
Logged

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: Has anyone converted a 357 Mag Handi into a 357/44 B&D?
« Reply #3 on: April 05, 2012, 09:42:00 PM »
Thats true you would lose the option of 38's and 357
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Has anyone converted a 357 Mag Handi into a 357/44 B&D?
« Reply #4 on: April 06, 2012, 12:41:16 AM »
There was one for sale on the big auction site a couple of years ago. 
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline dave29

  • GBO Supporter
  • Trade Count: (93)
  • Senior Member
  • *****
  • Posts: 1256
Re: Has anyone converted a 357 Mag Handi into a 357/44 B&D?
« Reply #5 on: April 06, 2012, 02:06:13 AM »
A .357-.460 would be way cooler.  ;D
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Has anyone converted a 357 Mag Handi into a 357/44 B&D?
« Reply #6 on: April 06, 2012, 03:06:32 AM »
They've been discussed before, nice round for TC pistols, but in a rifle the 35 Rem has a big advantage, specially on an SB2 frame using Super 35 Rem data, 180gr @2450fps! The 357-44 B&D has a case capacity of 35.6gr water compared to 50.8gr for the 35 Rem and 32.7gr for the 357Maxi, 357 Herrett is in the middel with 40.8gr.

Tim

http://www.gboreloaded.com/forums/index.php/topic,94814.msg1098229219.html#msg1098229219

http://ammoguide.com/cgi-bin/aicompare.cgi?sn=fDhhRLklFW&loadset=64&xxglbl=1
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline tom548

  • GBO Supporter
  • Trade Count: (51)
  • A Real Regular
  • *****
  • Posts: 693
  • Gender: Male
Re: Has anyone converted a 357 Mag Handi into a 357/44 B&D?
« Reply #7 on: April 06, 2012, 03:25:10 AM »
I have a Ruger Black Hawk that was converted back in the 70"s, by a gun smith in Ca.He called it the 357/44 Bobcat mag. It is a great round, very accurate but is about the same as a .357 max. in power. You also have a 4th die to make the brass from 44 mag. ( I think you could use a 41 mag. sizer adjusted correctly) It was worth it in the hand gun due to limited case length. I think the .357 mag is a better choice in the Handi.
Logged

Offline broom_jm

  • Trade Count: (0)
  • Member
  • *
  • Posts: 34
Re: Has anyone converted a 357 Mag Handi into a 357/44 B&D?
« Reply #8 on: April 06, 2012, 11:44:08 AM »
I went one step further.  I converted a 357 Mag Handi into a 358 GNR, which is a 445 Super Mag case necked down to 358.  It's just a longer version of the 357/44 B&D.  It is very similar in power to the 35 Remington, but when I had this done, a 1.800" 35 Remmy wasn't legal...  :)

If I had it to do now, and I was a reloader, I'd just go straight to 35 Remington.  If I wanted to get REAL tricky, I would cut a rim on that 1.800" 35 Remington chamber and then use trimmed down 303 British cases, for the higher MAP they allow (50,000psi).

:twocents:
Logged
Pages: [1]   Go Up
« previous next »