Anyone use h335 in a 357 Herrett??? Any load data???

[rescue_171]

I use h335 in my 30 Herrett and shoots great. I just got a 357 Herrett 10 inch barrel and plan on using 158 grain XTP's but can't find any data using h335 for the 357 Herrett. Anyone have any?
 
Thanks

[giddens1972]

I don't recall ever seeing any data for H335 for the 357 herrett...I know probably the best is either 2400 or 4227. 

[7-30 Waters]

I have only tried H322 and Ramshot X-terminator under a 200 grain Remington round nose bullet for deer hunting.  Not sure if you would bet a full powder burn with a 10" barrel using those two powders. 


I opted for a custom throat job and longer barrel to absorb some of the recoil and hand shock.

[giddens1972]

Here's a link to more loads
 
http://www.reloadersnest.com/forum/topic.asp?whichpage=1&TOPIC_ID=12956&

[Keith1]

I have been using 37grains of 322 and a 200 grain Hornady for more than 25 years. First in a 10 inch but now a 14 inch barrel. I got this load from the old Handgun Hunters International back in the early 1980s.
It's real accurat in the 14 inch barrel.
Regards, Keith
 

[Hopalong7]

     Long time Herrett(both)shooter here.  Either one are great choices when you're talking 10" barrels.  My first thought is H335 is a little slow for the 357Herrett, but, I would have said the same thing about the 30 and you're already using it with success....sooo...
I had the "Complete Reloading Manual for the Contender" at hand so I looked up 357Herrett....no data for H335 with any bullet weight.  The closest thing to it was a small amount of data for H322 with the heaviest of bullets.  My favorite powder for the big 357 has always been IMR4227 with H4227 a close 2nd, especially on the light weight bullet end and I would consider a 158gr light weight in the Herrett.  I have nearly always shot light jacketed bullets in the 357 Herrett and heavy cast bulletts in the 357Max ....Yup!!
My alltime favorite load is the old obsolite 150CLSP REM over a little less than max charge of IMR4227.  Lots of bambies haven't cared much for it over the years .
Walt

[rescue_171]

Yea I have the complete Contender load book as well and can't find any data that I need. I guess I will try some 4227 and 2400 and see what comes of it. I wish the wouldn't have discontinued the 150 corelock...Thanks guys

[Curtis]

4227 may do well for you, but if not I'm loading IMR 4198 under a 180 Hornady SS/PB.  Once I got my brass ironed out just about all the powder weights I tried shot well.  4227 works well in several other calibers for me but I never got around to trying it in the 357 Herrett.
Curtis