« previous next »
Pages: [1]   Go Down

Author Topic: H&R Shotgun barrels at Numrich arms  (Read 3478 times)

0 Members and 1 Guest are viewing this topic.

Offline handishooter

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 122
H&R Shotgun barrels at Numrich arms
« on: June 19, 2011, 02:38:22 PM »
I was on Numrich arms website recently, gunpartscorp.com and they have a large selection of H&R shotgun barrels. Most for 89 dollars without extractor. I ordered a 12ga 28 inch full choke barrel, intending to use it for a relining project and a .22 hornet extractor for 8.80 and about 10 dollars for the springs and rest of the bits for the extractor. It all arrived Saturday, the barrel and parts are brand new and with just a little fitting it locks up well on my receiver.

Though I would share the information, if anyone is looking for a shotgun barrel, or a donor for a project, I don't think the prices are too bad.
Logged
Handi family   10mm, 44mag, 6.5 x53r , 25/20, 7.62x54r, 50/70, 45/70, .32 s&w long

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: H&R Shotgun barrels at Numrich arms
« Reply #1 on: June 19, 2011, 03:22:16 PM »
Hi,

Does the barrel you bought have a welded or brazed underlug?

thanks

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline handishooter

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 122
Re: H&R Shotgun barrels at Numrich arms
« Reply #2 on: June 20, 2011, 02:36:09 PM »
It has the brazed underlug
Logged
Handi family   10mm, 44mag, 6.5 x53r , 25/20, 7.62x54r, 50/70, 45/70, .32 s&w long

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: H&R Shotgun barrels at Numrich arms
« Reply #3 on: June 21, 2011, 02:28:13 AM »
Quote from: handishooter on June 20, 2011, 02:36:09 PM
It has the brazed underlug

10-4, thanks.

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Duckdog

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 103
Re: H&R Shotgun barrels at Numrich arms
« Reply #4 on: June 21, 2011, 02:31:38 AM »
Everything I see is sold out.  What did you actually search under to get to the barrels that were still out ther?  Thanks
Logged

Offline handishooter

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 122
Re: H&R Shotgun barrels at Numrich arms
« Reply #5 on: June 21, 2011, 04:04:49 PM »
Logged
Handi family   10mm, 44mag, 6.5 x53r , 25/20, 7.62x54r, 50/70, 45/70, .32 s&w long

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: H&R Shotgun barrels at Numrich arms
« Reply #6 on: June 24, 2011, 03:43:47 AM »
Does the bble the snap on forend or does it have a screw lug brazed on ?? Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline handishooter

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 122
Re: H&R Shotgun barrels at Numrich arms
« Reply #7 on: June 24, 2011, 12:15:17 PM »
I bought one with the brazed on lug, but they do have both in stock.  This is the second one I bought, the first I turned into a 10mm and this one is going to be a .32
Logged
Handi family   10mm, 44mag, 6.5 x53r , 25/20, 7.62x54r, 50/70, 45/70, .32 s&w long
Pages: [1]   Go Up
« previous next »