« previous next »
Pages: [1]   Go Down

Author Topic: need some help  (Read 1309 times)

0 Members and 1 Guest are viewing this topic.

Offline snake eyes

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
need some help
« on: June 14, 2011, 02:43:01 PM »
my dad has a 760 in 06-got great deal on it-the stock is in pretty bad shape...anyway we bear hunt in some pretty nasty cover and were looking to put a synthetic pistol grip stock on it..heres the rub-stock is from ati but doesnt come with a fore end, cant seem to find a black synthetic fore end without buying rear stock as well.  We were kind of thinking a youth forend might work nice with a little smaller profile, but any ideas would be appreciated. I checked all the major sites and didnt come up with anything.By the way, weve been using 760s for years and have about a dozen of them between us and have never modified one this drastically!! Dad slipped last year and buggered up his 35 whelen pretty good and this is what brought on the idea of "fall proofing" one for bear season...Thanks for any help
Logged

Offline Bigeasy

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1986
  • Gender: Male
Re: need some help
« Reply #1 on: June 14, 2011, 03:24:57 PM »
Logged
Personal opinion is a good thing, and everyone is entitled to one.  The hard part is separating informed opinion from someone who is just blowing hot air....

Offline snake eyes

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
Re: need some help
« Reply #2 on: June 15, 2011, 04:56:43 PM »
thanks..saw that one but the stock he wants is pistol grip from ati. I looked again today and i think he might as well go with something like that.

http://atigunstocks.com/p-60-remington-7600-pistol-grip-buttstock.aspx
 its a little too modern for my tastes but im just the computer literate (somewhat) parts looker upper!!
Logged

Offline Spencer, Carey

  • Classified -- Banned
  • Trade Count: (2)
  • Avid Poster
  • *
  • Posts: 203
  • Gender: Male
Re: need some help
« Reply #3 on: June 15, 2011, 06:44:07 PM »
Numrich Gun Parts in West Hurley Ny may have just a fore end for you. Natchez, or MidSouth, or possibly Brownells also. Good luck sir! Oh yea, check local shops/shows yet? 
Logged

Offline oneoldsap

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 220
Re: need some help
« Reply #4 on: June 16, 2011, 06:12:57 AM »
 Sounds like you need some Black paint of Bed Liner !
Logged

Offline snake eyes

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
Re: need some help
« Reply #5 on: June 16, 2011, 11:28:49 AM »
i heard that an 870 20 ga fore end fits the 760-any one know for sure??
Logged

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: need some help
« Reply #6 on: June 17, 2011, 10:56:44 AM »
Is something like that available for the 742?
Logged
What is the point of Life if you can't have fun.

Offline oneoldsap

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 220
Re: need some help
« Reply #7 on: June 17, 2011, 04:55:07 PM »
       No 870 forends fit the 760 , however the 20Ga. Buttstock does !
Logged

Offline Mikey

  • GBO Supporter
  • Moderators
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Re: need some help
« Reply #8 on: June 20, 2011, 02:18:42 AM »
Snake Eyes:  with the information you have from theother posters you may wish to call remington directly and see what they either have or say about finding what you need.  I believe they use synthetic stocks on some of their rifles and shotguns but do not know which model stocks may or may not interchange.  I have often found the manufacturer to be helpful.  HTH.
Logged

Offline snake eyes

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
Re: need some help
« Reply #9 on: June 20, 2011, 07:59:37 AM »
thanks guys...oneoldsap-im liking the bed liner idea!!however the old man aint buying it!!i called ati directly and their tech guy was really helpful, but was kind of boggled why they didnt sell a forend to go with the buttstock, apparently im not the first hes talked to about it.  i have an email in to remington(we'll see how that goes) and theres a show nearby next weekend-ill keep ya posted thanks for all the advice
Logged
Pages: [1]   Go Up
« previous next »