« previous next »
Pages: [1]   Go Down

Author Topic: what size bullet for a ruger blackhawk .427 .429.430  (Read 1371 times)

0 Members and 2 Guests are viewing this topic.

Offline luckydawg13

  • GBO Supporter
  • Trade Count: (27)
  • A Real Regular
  • *****
  • Posts: 982
  • Gender: Male
what size bullet for a ruger blackhawk .427 .429.430
« on: February 03, 2011, 02:48:17 AM »
hello i have a lee T/L bullet mold  diameter is 0.430 will that size work OK or do i need to slug the cylinder just thought i would ask hear first thank you
Logged
kids that hunt and fish dont mug old Ladies
and drive a F150

Offline budman46

  • Trade Count: (0)
  • Member
  • *
  • Posts: 33
Re: what size bullet for a ruger blackhawk .427 .429.430
« Reply #1 on: February 03, 2011, 05:00:37 AM »
luckydawg,

lee states that no sizing is necessary with their t/l designs lubed with liquid alox...i use t/l designs whenever i can because they shoot great and save me a step.

budman

ignorance is fixable, stupidity is forever...
Logged
budman

ignorance is fixable...

Offline luckydawg13

  • GBO Supporter
  • Trade Count: (27)
  • A Real Regular
  • *****
  • Posts: 982
  • Gender: Male
Re: what size bullet for a ruger blackhawk .427 .429.430
« Reply #2 on: February 03, 2011, 05:14:39 AM »
cool thanks i like easy
Logged
kids that hunt and fish dont mug old Ladies
and drive a F150

Offline mdi

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 399
  • Gender: Male
Re: what size bullet for a ruger blackhawk .427 .429.430
« Reply #3 on: February 03, 2011, 02:13:12 PM »
Sooner or later you will need to know the diameter of your cylinder throats and the groove diameter. So why not slug your gun now? BTW. .427" would be a 44-40...
Logged

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: what size bullet for a ruger blackhawk .427 .429.430
« Reply #4 on: February 03, 2011, 03:07:42 PM »
Bullets should be a firm thumb press through the cylinder throats. Most Ruger 44s go .433". See how your bullet fits and you'll know.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18978
Re: what size bullet for a ruger blackhawk .427 .429.430
« Reply #5 on: February 03, 2011, 11:52:41 PM »
.430 works fine in most of my 44s. Some may perfer them a bit bigger but all shoot acceptably with 430s
Logged
blue lives matter

Offline OLDHandgunner

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 696
  • Gender: Male
Re: what size bullet for a ruger blackhawk .427 .429.430
« Reply #6 on: February 04, 2011, 01:44:08 AM »
Quote from: Lloyd Smale on February 03, 2011, 11:52:41 PM
.430 works fine in most of my 44s. Some may perfer them a bit bigger but all shoot acceptably with 430s

Agree
Logged

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: what size bullet for a ruger blackhawk .427 .429.430
« Reply #7 on: February 04, 2011, 02:09:30 AM »
.430 works very well in my new 44spl flattop that has .430 cylinder throats. My three older super blackhawks with .433 throats lead like crazy and can't hit the barn from the inside with .430 bullets. They shoot clean and more accurate than I can see with .433 bullets. Depends on your gun. It will tell you what it wants.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline luckydawg13

  • GBO Supporter
  • Trade Count: (27)
  • A Real Regular
  • *****
  • Posts: 982
  • Gender: Male
Re: what size bullet for a ruger blackhawk .427 .429.430
« Reply #8 on: February 04, 2011, 04:54:41 AM »
thanks to you all ill see how the .430 do my mold only drops a .431 so .433 is out
Logged
kids that hunt and fish dont mug old Ladies
and drive a F150

Offline Richard P

  • Trade Count: (7)
  • Contributor
  • ***
  • Posts: 341
  • Gender: Male
Re: what size bullet for a ruger blackhawk .427 .429.430
« Reply #9 on: February 16, 2011, 08:12:04 PM »
You should also determine the diameter of the throat of the barrel, hoping it is less than the diameter of the cylinder throats.
Logged
Pages: [1]   Go Up
« previous next »