missing pin on transfer bar!!

[oldsoldja]

I just bought this 7.62x39 and went to shoot it and the top half of the transfer bar fell out, and the pin is missing. Anyone want to fix this for me? Or should I send the reciever to h&r.

[quickdtoo]

You can't legally send it to someone out of state for repair unless they're an FFL, if you don't want to repair it yourself with a new transfer bar from Brownell's, you'll have to find someone local to do it, or make arrangements to send it to H&R, they may have a local gunsmith to send it to, I'd ask for a return shipping label to cover shipping.

Tim

http://www.hr1871.com/support/repairs.asp#map

[necchi]

With all the handis you got,,you aughta break this one down yerself an learn the "howtoo" ,
 I mean all those survival tactics ain't gonna do ya much good if'n ya cain't find a smith when ya need one.

[quickdtoo]

Perklo's trigger hone info in the FAQs shows complete R&R of the frame including the transfer bar, Brownell's or Numrich are the only source for the t-bar, H&R won't sell them according to the owner's manual. Might as well learn how to do a trigger job at the same time!! 

Tim

http://www.brownells.com/.aspx/sid=18169/pid=0/sku/Striker___Lifter_Assembly

[Junior1942]

Perklo's trigger hone info in the FAQs shows complete R&R of the frame including the transfer bar, Brownell's or Numrich are the only source for the t-bar, H&R won't sell them according to the owner's manual. Might as well learn how to do a trigger job at the same time!! 

Tim

http://www.brownells.com/.aspx/sid=18169/pid=0/sku/Striker___Lifter_Assembly

At only $12.99 is that something a shade tree gunsmith like me ought to have as a spare?  I have two actions but only one is a newer model with a transfer bar.

[quickdtoo]

Yes sir, it's one of the recommended spare parts listed in the FAQs. 



Tim

[Junior1942]

Yes sir, it's one of the recommended spare parts listed in the FAQs. 



Tim

I guess I need to read the FAQs........

[moorepower]

My first one broke at about 25 rounds. It is just a matter of figuring how to hold your tonge to get them in.

[oldsoldja]

yes your prob right, i should learn this, my fat fingers just
arent going to do it. maybe Ill get the old lady to do it for me.

[Junior1942]

Yes sir, it's one of the recommended spare parts listed in the FAQs. 



Tim

I guess I need to read the FAQs........

Tim . . . there's an encyclopedia of help in the FAQs, I just discovered.  I now know where to send people who ask me questions.  I'll start adding links, too.

[Spanky]

I need to replace the broken hammer in my 30-30 frame but I'm too much of a chickensh*t to try taking it apart. I probably won't be able to get it all back together.



Spanky

[gendoc]

for a minute there tom,... i thought ya might have had trouble with the max you got from me !!!! 

when ya get that 39 fixed, dont shoot milsurp/ steel cased/ berdan primed stuff out of it.
some have great luck with it, but them hardass primers do a whoop'n on tha pin !!!

been there... got the trophy.... learned tha hard way 

several here like and there handi's like the milsurp...... its only a matter of time, it will fail !!!!
over 2 years perfecting my 39. and its the best of 27 with my handloads

i'll give ya my handload recipe ifin ya want it. 

its jus a  "commie handi" as some think    but it can be a mighty fine shooter too

[quickdtoo]

Tim . . . there's an encyclopedia of help in the FAQs, I just discovered.  I now know where to send people who ask me questions.  I'll start adding links, too.

Junior,

We've been working on the FAQs for several years,  it's not organized very well, but the info is there free for the readin. 

thanks,

Tim

[gcrank1]

And if you dont mind voiding any potential warrantee, there is the 'eliminate the transfer bar completely' approach.
No reputable gunsmith will likely do so (liability is too great), but I keep thinking about it for mine in case somthing happens like on yours. Mine, however, are all long out of warrentee anyway.

Spanky.....you gotta get in there! It aint any harder (once you drop the pins) than your old capgun!

[digs68]

You can't legally send it to someone out of state for repair unless they're an FFL, if you don't want to repair it yourself with a new transfer bar from Brownell's, you'll have to find someone local to do it, or make arrangements to send it to H&R, they may have a local gunsmith to send it to, I'd ask for a return shipping label to cover shipping.

Tim

http://www.hr1871.com/support/repairs.asp#map

You can send it to a repair facility without FFl through regular mail and they can send it back. I sent mine in and they fixed it very fast at no charge to me. H&R has many authorized repair facilities throughout the states. Go to their website, pick one nearest, and call them. They will most likely tell you what they can do and if it will cost anything.
They are very friendly and easy to deal with.

[quickdtoo]

The repair facility(H&R) IS an FFL!!  

Tim

http://www.hr1871.com/support/repairs.asp

[oldsoldja]

well i ordered the brownell parts and will try to fix this bugger. Ill let you know how it goes.