« previous next »
Pages: [1]   Go Down

Author Topic: I Want to order a 357 but...  (Read 645 times)

0 Members and 1 Guest are viewing this topic.

Offline Rayzor

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 121
I Want to order a 357 but...
« on: May 26, 2010, 01:14:58 PM »
I am on the edge of the seat for sending in my SB-1 reciever for a 357 mag barrel to be fitted up. Then in a pm The janitor was telling me something about the 357 having pierced primer problems of some sort. Can someone comment on this? I dont need anything causing a injury as it will be a youth gun. Also, is the web site for nef barrel program still currant with there prices? I hope they still have open sights to.
Logged

Offline HAMMERHEAD

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 508
  • Gender: Male
Re: I Want to order a 357 but...
« Reply #1 on: May 26, 2010, 07:21:27 PM »
I've had my .357 barrel for over ten years, my most used barrel, no trouble.
Logged

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Re: I Want to order a 357 but...
« Reply #2 on: May 26, 2010, 08:52:06 PM »
I have a new SB1 357 syn that I got a few months ago. I've had no issues with it. -g
Logged
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline zoner

  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 1322
Re: I Want to order a 357 but...
« Reply #3 on: May 27, 2010, 03:27:03 AM »
i shoot a 357 on a sb1 frame and have had no problems using pistol primers
Logged

Offline blind ear

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4156
  • Gender: Male
    • eddiegjr
Re: I Want to order a 357 but...
« Reply #4 on: May 27, 2010, 07:58:30 AM »
I have 2 357 factory fitted barrels. No iron sights, scope base drilled and tapped. I am ordering sights that fit the scope base holes and will have the front site holes drilled and tapped.
Logged
Oath Keepers: start local
-
“It is no coincidence that the century of total war coincided with the century of central banking.” – Ron Paul, End the Fed
-
An economic crash like the one of the 1920s is the only thing that will get the US off of the road to Socialism that we are on and give our children a chance at a future with freedom and possibility of economic success.
-
everyone hears but very few see. (I can't see either, I'm not on the corporate board making rules that sound exactly the opposite of what they mean, plus loopholes) ear
"I have seen the enemy and I think it's us." POGO
St Judes Childrens Research Hospital

Offline Rayzor

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 121
Re: I Want to order a 357 but...
« Reply #5 on: May 27, 2010, 05:54:09 PM »
Ok sounds good, just thought i would check into it before buying one. I noticed on NEF web sight the that it says clean barrels for both the 44 mag and the 357. Did they stop adding iron sights?
Logged

Offline thejanitor

  • GBO Supporter
  • Trade Count: (59)
  • Senior Member
  • *****
  • Posts: 1094
  • Gender: Male
Re: I Want to order a 357 but...
« Reply #6 on: May 27, 2010, 06:52:42 PM »
Sorry Rayzor didn't mean to steer you wrong- But there is a thread here somewhere where a few were having a problem. I don't have one, but read it here somewhere. Sorry to all that have and love 'em, probably should have just kept my key board to myself. thejanitor
EDIT- http://www.gboreloaded.com/forums/index.php/topic,206806.0.html
 They were talking about a .357 max but it also refers to .357 mag (on shotgun frame) Is a SB-1 a shotgun frame? Just passing along what I read. Tonight it is on page 6 if the link doesn't work.
Logged

Offline Rayzor

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 121
Re: I Want to order a 357 but...
« Reply #7 on: May 27, 2010, 08:31:36 PM »
Hey no worries or apology needed. Thanks for the mention of a possible issue. Thanks for the thread.
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: I Want to order a 357 but...
« Reply #8 on: May 28, 2010, 04:45:51 AM »
I've had two .357s on SB1 frames with no issues.  When I reamed them to Max, I put them on SB2s.  I think anyone who owns a .357 and doesn't ream it to maxi is missing the boat.  Both of mine shot .38s and .357 mags perfectly and I was reluctant to risk one to the reamer.  Well, that was not a problem at all.  Both handle the .38s and mags the same way after reaming.  I put Allen 9 round buttstock cartridge holders on them, with 3 rounds each, 38, mag and max.  It's like carrying 3 different rifles in the field.  Ya gotta love it :-*

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491
Pages: [1]   Go Up
« previous next »