« previous next »
Pages: [1]   Go Down

Author Topic: single six 9.5 inch barrell  (Read 2368 times)

0 Members and 1 Guest are viewing this topic.

Offline hawken54

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
single six 9.5 inch barrell
« on: January 17, 2009, 08:41:47 AM »
does anyone know of a company who makes holsters for this gun, i am thinking about getting one and was searching for a holster for it if i go through with purchasing it. i think it would be a dandy of a squirrel gun. thanks Donnie
Logged

Offline Brett

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5148
  • Gender: Male
Re: single six 9.5 inch barrell
« Reply #1 on: January 18, 2009, 12:17:06 PM »
Saw one on e-bay just yesterday.  I'm on the hunt for a western style holster for my 6.5" SS. 
Logged
Life memberships:  <><, NRA, BASS, NAFC

Offline hawken54

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: single six 9.5 inch barrell
« Reply #2 on: January 18, 2009, 02:32:56 PM »
thanks i didnt look on ebay yet.
Logged

Offline Ladobe

  • Trade Count: (91)
  • Senior Member
  • *****
  • Posts: 3193
Re: single six 9.5 inch barrell
« Reply #3 on: January 18, 2009, 07:17:10 PM »
Triple K used to make them if I remember right.   Don't know if they still do or not, but might be worth a check.
Logged
Evolution at work. Over two million years ago the genus Homo had small cranial capacity and thick skin to protect them from their environment. One species has evolved into obese cranial fatheads with thin skin in comparison that whines about anything and everything as their shield against their environment. Meus

Offline hawken54

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: single six 9.5 inch barrell
« Reply #4 on: January 19, 2009, 02:15:51 PM »
thanks i will check triple k as well
Logged

Offline Brett

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5148
  • Gender: Male
Re: single six 9.5 inch barrell
« Reply #5 on: January 20, 2009, 12:19:21 PM »
Logged
Life memberships:  <><, NRA, BASS, NAFC

Offline hawken54

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: single six 9.5 inch barrell
« Reply #6 on: January 20, 2009, 05:37:04 PM »
thanks brett i am going to keep an eye on this one too, i was afraid i could not find a holster for this gun but now i am definitely going to add this gun to my collection. i had a friend that had a single six 9.5 when we where in high school and have fond memories of this gun, i have a mark ll 4 inch standard that i have had for years and love shooting, but squirrel hunting in the mountains of virginia is one of my all time favorite pastimes and i think a single six with a long barrel would be great for this. please bear with me i'm new to computers but would like to thank all of you on this forum, for i have already gained alot of info from the posts i have read. thanks donnie
Logged

Offline 44-40

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: single six 9.5 inch barrell
« Reply #7 on: January 29, 2009, 02:59:01 PM »
I have a uncle mikes and seems like cabelas carried a leather western design
Logged

Offline hawken54

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: single six 9.5 inch barrell
« Reply #8 on: January 29, 2009, 04:10:50 PM »
thanks i will look into uncle mikes as well. i believe that is who made the holster i have for my mark ll and has always served the purpose just fine.
Logged

Offline Brett

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5148
  • Gender: Male
Re: single six 9.5 inch barrell
« Reply #9 on: January 31, 2009, 03:45:38 PM »
Hawken, Did you pick up that SS with the 9.5" barrel.   I saw a used one at a gun shop today that they wanted over $700 for.  :o   These guys are way out there. They also had a blued, 6.5" SS like mine there that they wanted almost $400 for.   I payed for $250 for mine. 
Logged
Life memberships:  <><, NRA, BASS, NAFC

Offline S.B.

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3953
  • Gender: Male
Re: single six 9.5 inch barrell
« Reply #10 on: February 07, 2009, 06:06:22 PM »
Donnie, you might try one of the custom holster makers like El Paso Saddlery? I think I've seen one of the Ruger flap holsters over on Ruger.com in the past but, not sure. Memory is like other parts of my anatomy.
HTH, Steve
Logged
"The Original Point and Click Interface was a Smith & Wesson."
Life member of NRA, USPSA,ISRA
AF&AM #294
LIUNA #996 for the past 34 years/now retired!

Offline hawken54

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: single six 9.5 inch barrell
« Reply #11 on: February 17, 2009, 02:01:24 PM »
well i just wanted to thank you all for all of your responses, i haven't been on here much of late. as it turns out while i've been debating on whether or not to buy the 9.5 inch single six my brother in law called and wanted to know if i wanted to buy a single six with a 6.5 inch barrel and it is stainless steel so after all of my drooling over a new single six it looks like i'm going to buy a used one with a little less tube.
Logged

Offline Ladobe

  • Trade Count: (91)
  • Senior Member
  • *****
  • Posts: 3193
Re: single six 9.5 inch barrell
« Reply #12 on: February 17, 2009, 06:28:05 PM »
More often than not plans change after questions are asked here on the board for one reason or another, so that's common enough to be pretty much expected.   What's even more common though is all the folks who ask questions, and then don't have the decency to come back and acknowledge replies to their questions.   So thank you for doing that.
Logged
Evolution at work. Over two million years ago the genus Homo had small cranial capacity and thick skin to protect them from their environment. One species has evolved into obese cranial fatheads with thin skin in comparison that whines about anything and everything as their shield against their environment. Meus

Offline Brett

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5148
  • Gender: Male
Re: single six 9.5 inch barrell
« Reply #13 on: February 19, 2009, 01:06:02 AM »
Hawken, Good luck with your new SS/SS, we expect to hear a full report on  after you have a chance to shoot it.  I think you will find the 6.5" SS friendlier to carry and to shoot.  Those uber long barrels are nice for precision work from a bench and/or a solid rest but can be a real pain in the field.
Logged
Life memberships:  <><, NRA, BASS, NAFC

Offline hawken54

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: single six 9.5 inch barrell
« Reply #14 on: February 20, 2009, 04:30:07 PM »
thanks brett i hope to get out this saturday and do some shooting i will try to take some pics and let you all know how it goes thanks Donnie
Logged

Offline buckweet

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 248
Re: single six 9.5 inch barrell
« Reply #15 on: February 27, 2009, 03:58:58 PM »
i have an old hunter holster for my ruger 9.5 , has worker great for years.

weet
Logged

Offline Calvin

  • Trade Count: (0)
  • Posts: 2
Re: single six 9.5 inch barrell
« Reply #16 on: June 27, 2010, 08:59:17 AM »
1st post fng,

I know this is a older thread, but just purchesed and SS Single Six w/ a 5 1/2 brl. and was look'n for something to keep in. Ran across this on line and for some odd reason it appeals to me. Seems he can make something to fit the longer tubes if asked. Might appeal to others also.

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=175854248
Logged
Pages: [1]   Go Up
« previous next »