« previous next »
Pages: [1]   Go Down

Author Topic: H&R .204 Ruger Bull Barrel Loads  (Read 1245 times)

0 Members and 1 Guest are viewing this topic.

Offline Fat NDN

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 118
  • Gender: Male
H&R .204 Ruger Bull Barrel Loads
« on: February 04, 2008, 07:31:23 PM »
Iam using Varget loading my new .204 bull barrel.  What are some of you best Varget Loads --  32gr Nosler Ballistic tip and 39 gr Sierra matchKing ?
Logged

 .
 One Shot - One Kill

Offline mitchell

  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 2067
  • Gender: Male
Re: H&R .204 Ruger Bull Barrel Loads
« Reply #1 on: February 05, 2008, 05:44:40 AM »
well my 204 loads use a hornady 32gr vmax and varget but they are as hot as a night after eating taco's in hell. but i will say that the faster i loaded it the better it shot, so for a quick fix work your way up to YOUR RIFLE'S MAX LOAD (not your manual ) back it down, about .3 and then start backing it down .3gr at a time , shooting groups 3 shot groups and i''ll bet by the time you reach 1 grain under your max you'll find your sweet spot.


(BTW i'm away from my load notes right now, i'm in iraq, but i think my best groups were at 31.0 grains of BL-C2 but don't quote me on that, and my 204 can freeking shoot just anybody who went to the first P-dog shoot or entered a postal match)

good luck have fun and keep us posted
Logged
curiosity killed the cat , but i was lead suspect for a while

Offline aulrich

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 678
Re: H&R .204 Ruger Bull Barrel Loads
« Reply #2 on: February 05, 2008, 07:49:55 AM »
My best results were with H4895 max - 0.3 and sierra 39's.

I had good accuracy with blc-(2) and the lighter bullets, I could not get anywhere near max before I hit pressures signs though.

My results with varget were only OK.

Never tried it personally but reloader 10 is reported to do well with the light bullets as well

Logged
The second mouse gets the cheese

Offline McLernon

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1217
Re: H&R .204 Ruger Bull Barrel Loads
« Reply #3 on: February 05, 2008, 02:02:42 PM »
I had the same pressure problem with BL-C(2) with just mid-level loads. My best accuracy so far is with IMR-4895 loaded light. I still haven't got the latch and mating lug surface to mate-up evenly across the width of the lug so-------------- I still haven't got my 204BB shooting to its potential. It is nominally 1MOA so far with 32 gr. Vmax's. I still hope, with light stoning/rebluing between range sessions, to better this.

Good luck with yours.

Mc
Logged

Offline mitchell

  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 2067
  • Gender: Male
Re: H&R .204 Ruger Bull Barrel Loads
« Reply #4 on: February 07, 2008, 07:37:05 AM »
oops i mean to put BL_C2 not varget in my load sorry more and more lately i've been finding my mind elsewhere
Logged
curiosity killed the cat , but i was lead suspect for a while

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: H&R .204 Ruger Bull Barrel Loads
« Reply #5 on: February 07, 2008, 07:40:09 AM »
Mitch, I was thinkin your load was BL-C2 cuz that's what I used, and it worked well!! ;D Remember all the fuss Fred made over it!!  :D  I didn't get the same accuracy you did, but it's the best mine's done so far with the 40gr Vmax.

Tim

http://www.gboreloaded.com/forums/index.php/topic,79053.msg488957.html#msg488957

http://www.gboreloaded.com/forums/index.php/topic,118881.msg1098392036.html#msg1098392036
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »