raised cheekpiece for SL youth

[luv2shoot]

Where can I get a raised cheekpiece for a SL youth?  Dare I say like the Rossi's have on them

[quickdtoo]

Cabelas has some, if the search expires, type cheek pad in their search box.

Tim

http://www.cabelas.com/cabelas/en/common/search/search-results1.jsp?QueryText=cheek+pad&N=4887&Ntk=Products&Ntx=mode+matchall&Nty=1&Ntt=cheek+pad&noImage=0

[Dillohide]

You can also slide a piece of 1/2 inch foam (like from those cheap sleeping bag mats) under an elastic Allen stock cartridge holder. Makes a nice cheek piece and you still use the cartridge holder. Cut the foam about 4 inches wide and 7 to 8 inches long so it slides under on both sides of the stock. I use it on my 30-30, 45/70 and just put one on a used 270 I bought because it has the high rings on it.

[luv2shoot]

Thanks, watching my daughter try to shoot is making me pull my hair out and I don't have much left.

Dillo, I assume you mean those blue sleeping mats?

[MTGlass]

I put a Beartooth Comb Raising kit on my daughter's SB2-Y08 7mm-08 Youth Model.  Works really well but the pads are a bit long for the short stock.  No trouble to trim them down.

http://www.beartoothproducts.com/cgi/shop/category.cgi?cat=Comb%20Raising%20Kit

They're cheaper at Sportsmans Warehouse.

[Dillohide]

Dillo, I assume you mean those blue sleeping mats?

Yes, I think they are less than $10.00 at Wal-Mart, Academy etc. You can probably also get something at Home Depot. Any kind of foam pad would work. Raising the point of contact by 1/2 inch or so makes a lot of difference and if you need more might be able to work another piece in. I anchor the cartridge holder before inserting the foam by slicing a small hole in it so the sling nut sticks through the bottom.

[luv2shoot]

thanks guys