« previous next »
Pages: [1]   Go Down

Author Topic: 338 WM barrel length  (Read 1117 times)

0 Members and 1 Guest are viewing this topic.

Offline EDELWEISS

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 185
338 WM barrel length
« on: September 20, 2007, 02:17:18 AM »
Ive got a M77 old style tang safety in 338 Winchester Magnum thats "calling" to me for some customizing.  Ive been thinking about a totally new look. My plan was to use a full length custom Manlicher style stock and shorten the barrel to about 20 inches then add a muzzle brake for a final length of about 22 inches.  The brake is more for looks than recoil.  I seem to remember seeing something from Steyr like this but I cant find it now.

My buddies are telling me that I shouldnt shorten the barrel because the magnum cartridge needs the extra length, especially since I dont reload.  It wont be used for long range.  My normal hunting areas are pretty much limited to about 200 yard shots.    So I was thinking that the combo would still be effective.

Is 20 inches too short?  Any suggestions?
Logged

Offline EDELWEISS

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 185
Re: 338 WM barrel length
« Reply #1 on: September 20, 2007, 02:19:50 AM »
Ive also been thinking about a "butter knife" bolt handle and a compact scope with a post reticle.
Logged

Offline Mckie Hollow

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
Re: 338 WM barrel length
« Reply #2 on: September 20, 2007, 06:55:24 PM »
Don't do it. Let the 338 be what it is. Forget the brake. If you want something different - Buy New
Logged

Offline EDELWEISS

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 185
Re: 338 WM barrel length
« Reply #3 on: September 21, 2007, 05:24:52 AM »
Yeah Im coming around to that decision.  What started as concept is running into reality.  I was thinking it might be something akin to a 9.3 type carbine; but youre making sense.  Even as it stands it does raise eyebrows when everybody else brings a "thuddy-thuddy" to deer camp.

Thanks for the advice.
Logged

Offline Rangr44

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 2158
Re: 338 WM barrel length
« Reply #4 on: September 21, 2007, 05:48:32 AM »
Good decision !   The .338WM is a nice cartridge, but you'd have been cutting it off at the knees (so to speak) by going with a barrel shorter than 24" or so.

AFAIK, though, the new .338 Federal's ballistics don't suffer from shorter barrels.  Ruger issues it in their Frontier Model,  IIRC - which would look really nice with a full-length stock.
Logged
There's a Place for All God's Creatures - Right Next to the Potatoes & Gravy ! !

Offline jbmi

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 105
Re: 338 WM barrel length
« Reply #5 on: September 28, 2007, 02:17:19 PM »
My Model 70 sports a factory 25 1/2" barrel. I made it look different by taking off the walnut in exchange for a custom painted McMillan.
I'm 6'5" tall, one or two inches off the barrel means zip to me.
Logged
Pages: [1]   Go Up
« previous next »