« previous next »
Pages: [1]   Go Down

Author Topic: Need a price..  (Read 1042 times)

0 Members and 1 Guest are viewing this topic.

Offline Dogmann

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 314
Need a price..
« on: July 22, 2007, 08:01:37 AM »
I have two never shot 22mags-

One is a H&R Ultra 22mag

One is a Matte Silver with a Grey Laminate stock 22mag

I was told that the Matte Silver was a limited  edition model...dont know. What would  do these go for$$$
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Need a price..
« Reply #1 on: July 22, 2007, 08:06:55 AM »
The Ultra sells new for about $150 or a little more, the limited edition sells for what ever they can get for it, but I'd not go much more than the Ultra, depending on how bad you wanted it!!

Tim

http://www.walmart.com/catalog/product.do?product_id=3138381
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Dogmann

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 314
Re: Need a price..
« Reply #2 on: July 22, 2007, 08:24:25 AM »
Have you heard or seen these Matte Silver 22mag models?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Need a price..
« Reply #3 on: July 22, 2007, 08:29:30 AM »
I vaguely remember someone posting about them, but I've never seen em. I have seen an N.W.T.F. limited edition shotgun done in the matte nickel finish, so I have no doubt they exist, but there aren't a lot of them. I have 3 of the gray lam stock sets, 2 that are checkered, one uncheckered limited edition set that's not mounted right now.

Tim



Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline d_hiker

  • GBO Supporter
  • Trade Count: (69)
  • A Real Regular
  • *****
  • Posts: 969
Re: Need a price..
« Reply #4 on: July 22, 2007, 11:45:04 AM »
Tim,

Would the sportster barrels fit on the Ultra rimfire frame?

Dogmann,
PM sent about your location
Logged
"IF YOU DON'T STAND BEHIND OUR TROOPS, PLEASE, FEEL FREE TO STAND IN FRONT OF THEM !!!"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Need a price..
« Reply #5 on: July 22, 2007, 12:05:19 PM »
Sure, as well as any H&R barrel does on other frames, anyway!! :D I've put a rimfire barrel on an SB2 frame to demonstrate what happens to a rimfire cartridge fired on a centerfire frame, nothing of course.....but it fit fine. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline d_hiker

  • GBO Supporter
  • Trade Count: (69)
  • A Real Regular
  • *****
  • Posts: 969
Re: Need a price..
« Reply #6 on: July 22, 2007, 12:55:56 PM »
 ::)  Okay...  just want to make sure that it wasn't an offset bore like the Versa Pak.
Logged
"IF YOU DON'T STAND BEHIND OUR TROOPS, PLEASE, FEEL FREE TO STAND IN FRONT OF THEM !!!"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Need a price..
« Reply #7 on: July 22, 2007, 01:02:42 PM »
H&R will fit other rimfire barrels to the Ultra 22 mag frame, unlike the Versa pack frame which they won't fit any barrels to, some would very much like a 22mag barrel for their Versa pack. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Need a price..
« Reply #8 on: July 22, 2007, 03:46:55 PM »
That would be me!!!
When I come up with a second Versa Pak .22 LR barrel it will become a .22 Mag barrel....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Dogmann

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 314
Re: Need a price..
« Reply #9 on: July 22, 2007, 04:34:51 PM »
Can I use a 44mag or 357mag barrel on  either of these frames? I also have a 20 gauge frame?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Need a price..
« Reply #10 on: July 22, 2007, 04:40:17 PM »
No, neither is a heat reated frame, the SS1 rimfire frame won't work with a centerfire barrel even if they were strong enough!

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Dogmann

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 314
Re: Need a price..
« Reply #11 on: July 28, 2007, 10:21:41 AM »
Tim- message inbound!
Logged
Pages: [1]   Go Up
« previous next »