« previous next »
Pages: [1]   Go Down

Author Topic: New grips  (Read 1033 times)

0 Members and 1 Guest are viewing this topic.

Offline Incitatus

  • Trade Count: (6)
  • Contributor
  • ***
  • Posts: 333
  • Gender: Male
New grips
« on: July 30, 2011, 05:41:54 PM »
Here are the new grips made by Dan Shearer out in Colo.

He made me two fore ends, one for octagon barrels and one for round.  He makes a neat extension for use with a bipod, it is shown it a 22 LR barrel with a Burris scope.  The 12" barrel is a 22 mag.  You can put a bipod directly on the included swivel.

Great work from a nice guy.  Thanks Don. 


Logged
NRA Life Member-Patron-Endowment-Benefactor

Offline luckydawg13

  • GBO Supporter
  • Trade Count: (27)
  • A Real Regular
  • *****
  • Posts: 982
  • Gender: Male
Re: New grips
« Reply #1 on: July 31, 2011, 03:40:40 AM »
sweet
Logged
kids that hunt and fish dont mug old Ladies
and drive a F150

Offline dapster

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
Re: New grips
« Reply #2 on: August 01, 2011, 06:23:11 AM »
Quote from: Incitatus on July 30, 2011, 05:41:54 PM
Here are the new grips made by Dan Schearer out in Colo.
How does the trigger reach of your new grip compare to the original T/C grip - longer, shorter or about the same?
Logged

Offline butchen

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 171
Re: New grips
« Reply #3 on: August 01, 2011, 08:49:35 AM »
Very cool grips love the fit and finish.
That bipod extension is too cool. how does it work. can you post close up pic's of it I like the idea of it a lot. does he have a web site or is there a way I can get one of the extensions? I see tons of uses for that. thanks
Logged
Government is not the solution to our problems. Government is the problem. – Ronald Reagan

When the people fear their government, there is tyranny; when the government fears the people, there is liberty." - Thomas Jefferson

I always thank my God for you because of his grace given you in Christ Jesus.For in him you have been enriched in every way—with all kinds of speech and with all knowledge— - 1 Corinthians 1:4-5

Offline Incitatus

  • Trade Count: (6)
  • Contributor
  • ***
  • Posts: 333
  • Gender: Male
Re: New grips
« Reply #4 on: August 01, 2011, 04:26:03 PM »
Quote from: butchen on August 01, 2011, 08:49:35 AM
Very cool grips love the fit and finish.
That bipod extension is too cool. how does it work. can you post close up pic's of it I like the idea of it a lot. does he have a web site or is there a way I can get one of the extensions? I see tons of uses for that. thanks

Sure, I'll do it tomorrow.

Logged
NRA Life Member-Patron-Endowment-Benefactor

Offline Incitatus

  • Trade Count: (6)
  • Contributor
  • ***
  • Posts: 333
  • Gender: Male
Re: New grips
« Reply #5 on: August 02, 2011, 02:44:58 AM »
Quote from: butchen on August 01, 2011, 08:49:35 AM
Very cool grips love the fit and finish.
That bipod extension is too cool. how does it work. can you post close up pic's of it I like the idea of it a lot. does he have a web site or is there a way I can get one of the extensions? I see tons of uses for that. thanks

Here are some more pictures



The captive bolt on the grip is replaced with the one on the extension as is the swivel.  I think that I will replace the fixed swivels with a rotating one.  It is a very nice addition to the fore end and is quite rigid. 

Logged
NRA Life Member-Patron-Endowment-Benefactor

Offline Incitatus

  • Trade Count: (6)
  • Contributor
  • ***
  • Posts: 333
  • Gender: Male
Re: New grips
« Reply #6 on: August 02, 2011, 02:48:31 AM »
Quote from: dapster on August 01, 2011, 06:23:11 AM
Quote from: Incitatus on July 30, 2011, 05:41:54 PM
Here are the new grips made by Dan Schearer out in Colo.
How does the trigger reach of your new grip compare to the original T/C grip - longer, shorter or about the same?

Better.  I sent an outline drawing of my hand so it   was fine tuned.
Logged
NRA Life Member-Patron-Endowment-Benefactor

Offline butchen

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 171
Re: New grips
« Reply #7 on: August 02, 2011, 07:04:59 AM »
That is a very cool idea for pushing the bipod forward. thanks for the pic's
Logged
Government is not the solution to our problems. Government is the problem. – Ronald Reagan

When the people fear their government, there is tyranny; when the government fears the people, there is liberty." - Thomas Jefferson

I always thank my God for you because of his grace given you in Christ Jesus.For in him you have been enriched in every way—with all kinds of speech and with all knowledge— - 1 Corinthians 1:4-5

Offline Ladobe

  • Trade Count: (91)
  • Senior Member
  • *****
  • Posts: 3193
Re: New grips
« Reply #8 on: August 02, 2011, 08:57:43 AM »
Now that is a beautiful grip set.    And a very interesting idea for a bipod mount.   8)  It appears to be forend profile specific with the bend to match the forends taper though.   I've always achieved the same by simply using 1-2 Harris wedge rubber spacers that can easily be adjusted to fit any forend angle, so they are very versatile.   I wouldn't want the bipod pushed so far forward myself, see no advantage in that.   But it's always nice to see new options to fit your personal tastes and technique.   Looks like he does very nice work and could easily sell it.   Thanks for sharing your pictures and adding another great source to the list.   ;)   
Logged
Evolution at work. Over two million years ago the genus Homo had small cranial capacity and thick skin to protect them from their environment. One species has evolved into obese cranial fatheads with thin skin in comparison that whines about anything and everything as their shield against their environment. Meus

Offline David D.

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 680
  • Gender: Male
Re: New grips
« Reply #9 on: August 02, 2011, 02:27:39 PM »
That is a beautiful set! Over the years I've seen a lot of pics of Don's work. He truly is a Master Craftsman!!!!!
Logged
Dave D.
Pages: [1]   Go Up
« previous next »