« previous next »
Pages: [1]   Go Down

Author Topic: Loading 357 Max - Hornady 180 ssp - Die set?  (Read 681 times)

0 Members and 1 Guest are viewing this topic.

Offline blind ear

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4156
  • Gender: Male
    • eddiegjr
Loading 357 Max - Hornady 180 ssp - Die set?
« on: November 25, 2012, 03:29:11 PM »
What die set do I need? Will I have to get a different bullet seater for the pointed bullet?
Thanks, ear
Logged
Oath Keepers: start local
-
“It is no coincidence that the century of total war coincided with the century of central banking.” – Ron Paul, End the Fed
-
An economic crash like the one of the 1920s is the only thing that will get the US off of the road to Socialism that we are on and give our children a chance at a future with freedom and possibility of economic success.
-
everyone hears but very few see. (I can't see either, I'm not on the corporate board making rules that sound exactly the opposite of what they mean, plus loopholes) ear
"I have seen the enemy and I think it's us." POGO
St Judes Childrens Research Hospital

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #1 on: November 25, 2012, 03:31:41 PM »
I modified mine, other have sent to MFG for a proper seater stem.

Most any 357Mag die set will do the job for you.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline yukondog

  • GBO Supporter
  • Trade Count: (43)
  • Senior Member
  • *****
  • Posts: 1095
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #2 on: November 25, 2012, 04:16:44 PM »
Like CW I modified mine also, I use a Lee 38 spl. die and load 38 spl.,357 mag,360 DW and the max all with one die.
Logged
an unloaded wepon is equal to the same mass and volume as a rock.

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #3 on: November 25, 2012, 09:54:27 PM »
I sent a bullet in to Lee.  About a week and eight bucks later I had the seater.  The same die set does all of them.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #4 on: November 26, 2012, 03:31:51 AM »
I bought a set of RCBS from the classifieds a couple weeks ago that only say 357 MAX on them. Haven't been able to find them in cats. or on web to see why they just say MAX. Maybe they were only made for a while or people were just using the mag dies and no demand for these. Have an extra toolhead and will just set it up for loading MAX. They came with 3 seater stems but don't think any are for pointy. Have to look closer and if not, see about ordering the right one.
Anybody else have these dies that only seem to be for MAX? Thanks
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #5 on: November 26, 2012, 04:37:05 AM »
The RCBS pointed bullet seater plug part number is in the FAQs as well as other suggestions for pointed seater die options.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #6 on: November 26, 2012, 04:52:07 AM »
Thanks Tim, I remember hearing there were options in the faqs. Finally got back on 223 and haven't looked the plugs over in my set. I know round and semi wc is in there but don't remember the other. Probably order one so I'll have it when ready. Thanks for putting the part # in there. Was wondering about the dies, Googled the part# and checked on RCBS site and in loading catalogs. They look as new. Was gonna use my Dillon 38/357 dies till these came up. Some dies seem shorter than others :-\  Don't know if that would even matter. 
Logged

Offline Vic49

  • GBO Supporter
  • Trade Count: (30)
  • Contributor
  • *****
  • Posts: 483
  • Gender: Male
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #7 on: November 26, 2012, 09:35:33 AM »
Quote from: bigvarmnt on November 26, 2012, 03:31:51 AM
I bought a set of RCBS from the classifieds a couple weeks ago that only say 357 MAX on them. Haven't been able to find them in cats. or on web to see why they just say MAX. Maybe they were only made for a while or people were just using the mag dies and no demand for these. Have an extra toolhead and will just set it up for loading MAX. They came with 3 seater stems but don't think any are for pointy. Have to look closer and if not, see about ordering the right one.
Anybody else have these dies that only seem to be for MAX? Thanks


 I have a set of the RCBS MAX dies and the 3 seater stems none of which are for pointy bullets.
Logged
And what country can preserve its liberties, if its rulers are not warned from time to time, that this people preserve the spirit of resistance? Thomas Jefferson
Handi rifles
Knight, T/C and CVA Muzzleloaders
Bowtech and Diamond bows

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #8 on: November 26, 2012, 11:04:16 AM »
I found an old 357 Mag Lyman steel die set at a local shop for $10. It came with 3 seater plugs so I modified one of them with a drill for the 180 SSP's. I use Lee carbide 38 Special dies for resizing and expanding the case mouth.
Logged
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #9 on: November 26, 2012, 12:29:52 PM »
Thanks Vic, I haven't looked them over real good yet. Scanned the instructions but didn't see any thing special. May try to modify or just buy one. Have to look in my Dillon box as somewhere years ago I remember other seaters included. Mostly was curious if they were much different from regular 38/357 dies. I'll just set up a tool head for MAX ;D
Logged

Offline jsn_mooney

  • Trade Count: (0)
  • Posts: 2
  • Gender: Male
  • Freedom Isn't Free
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #10 on: November 27, 2012, 01:30:20 AM »
I've been using a new Hornady set, mine came with both seater plugs.
Logged

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #11 on: November 27, 2012, 01:58:05 AM »
I have a Lee die set for the 38 Special. I had a little trouble with the bullet seating die being a little too short. So I bought the Hornady seating die, no issues with mine. So now I use the carbide Lee sizing die and the Hornady seating die. It handles the SSP bullet with out a hitch. It does get hung up a little (in the sliding sleeve) when using .358 diameter bullets, but still does it OK

Good Luck and Good Shooting
Logged
Great men have vision and resolve to make dreams come true.

Offline dave29

  • GBO Supporter
  • Trade Count: (93)
  • Senior Member
  • *****
  • Posts: 1256
Re: Loading 357 Max - Hornady 180 ssp - Die set?
« Reply #12 on: November 27, 2012, 03:38:34 AM »
As mentioned, the Hornady set comes with both seater plugs. The standard and one for Spire point bullets. That's the set I bought.
Logged
Pages: [1]   Go Up
« previous next »