www.GBOReloaded.com
Home
Help
Articles
Classifieds
Login
Register
Graybeard Outdoors (GBO Reloaded)
»
Rifle and Optics Forums
»
TC Encore/Contender and TCR Rifles
(Moderators:
Keith L
,
jason280
) »
22-250 & partitions
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: 22-250 & partitions (Read 567 times)
0 Members and 1 Guest are viewing this topic.
Tad Houston
Trade Count:
(
37
)
A Real Regular
Posts: 738
22-250 & partitions
«
on:
June 30, 2004, 08:29:44 AM »
Anyone here have good luck with nosler's 60 gr. partition in the factory 22-250 SS heavy barrel? Anyone know the rate of twist off hand? Thanks- Tad
Logged
curiousgb
Trade Count:
(
0
)
Member
Posts: 28
22-250 & partitions
«
Reply #1 on:
June 30, 2004, 02:34:05 PM »
I have gotten some pretty good groups with the few loads I tried. I used the "most accurate" powder and load from the Nosler manual. I got a little over 3500fps. I might use it on deer this season.
George
Logged
George in Charleston
Tad Houston
Trade Count:
(
37
)
A Real Regular
Posts: 738
22-250 & partitions
«
Reply #2 on:
June 30, 2004, 02:37:12 PM »
Thanks George, i dont have the nosler manual, could you share that load with me? Thanks- Tad
Logged
curiousgb
Trade Count:
(
0
)
Member
Posts: 28
22-250 & partitions
«
Reply #3 on:
July 02, 2004, 11:29:03 AM »
Here is what I have:
H380 -
36.5
38.5 3850fps
Varget -
30
34 3525fps
Imr 4895
29
33 3500fps
Imr 4350
34.5
38.5 3560
George
Logged
George in Charleston
Tad Houston
Trade Count:
(
37
)
A Real Regular
Posts: 738
22-250 & partitions
«
Reply #4 on:
July 02, 2004, 01:37:09 PM »
Thanks George, i appriciate that. Now which one is "the most accurate powder"? I'm leaning towards 4350. Thanks again- Tad
Logged
curiousgb
Trade Count:
(
0
)
Member
Posts: 28
22-250 & partitions
«
Reply #5 on:
July 04, 2004, 12:45:43 PM »
Tad,
I got the load info from a friend and I don't remember which was "most" accurate. I had good luck with Varget.
George
Logged
George in Charleston
Print
Pages: [
1
]
Go Up
« previous
next »
Graybeard Outdoors (GBO Reloaded)
»
Rifle and Optics Forums
»
TC Encore/Contender and TCR Rifles
(Moderators:
Keith L
,
jason280
) »
22-250 & partitions