« previous next »
Pages: [1]   Go Down

Author Topic: NS prefix receiver woes  (Read 664 times)

0 Members and 1 Guest are viewing this topic.

Offline fluffyphydeaux2010

  • Trade Count: (29)
  • Contributor
  • ***
  • Posts: 341
  • Gender: Male
NS prefix receiver woes
« on: April 16, 2012, 03:10:25 PM »
got a NS prefix receiver off here thats suposed to be a SB2 but NO BARRELS will fit and I won't want to modify any to fit it. not even shotgun barrels! whats the problem?
Logged

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: NS prefix receiver woes
« Reply #1 on: April 16, 2012, 03:20:01 PM »
I have a few receivers and one barrel didn't fit any. I finally bought one that that barrel fit. Just cause it's a Sb2 doesn't mean all barrels will fit.  Think it works both ways. Might be a handi one to have around if you plan to buy many more barrels.
Good Luck
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: NS prefix receiver woes
« Reply #2 on: April 16, 2012, 03:31:08 PM »
IF the back of your receiver is skeletonized, see pic in the FAQs or on the HR1871 website, then it is an SB2.  The fact none of your barrels will lockup properly on it means nothing regarding the type of the receiver.  The "problem" is because of manufacturing tolerances the receivers and barrels are all just a tad different and either one lucks out with a barrel purchase and it fits an existing receiver or as in your case it doesn't fit.  It does not mean there is anything wrong with the receiver or the barrel.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: NS prefix receiver woes
« Reply #3 on: April 16, 2012, 03:34:22 PM »
Are the barrels loose when locked up or they wont lock at all
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline fluffyphydeaux2010

  • Trade Count: (29)
  • Contributor
  • ***
  • Posts: 341
  • Gender: Male
Re: NS prefix receiver woes
« Reply #4 on: April 16, 2012, 03:35:21 PM »
wont lock up
Logged

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: NS prefix receiver woes
« Reply #5 on: April 16, 2012, 03:38:21 PM »
Little bit of work with a rat tail will fix that
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline fluffyphydeaux2010

  • Trade Count: (29)
  • Contributor
  • ***
  • Posts: 341
  • Gender: Male
Re: NS prefix receiver woes
« Reply #6 on: April 16, 2012, 03:39:49 PM »
don't want to ruin a barrel. I'll just see about trading for another SB2
Logged

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: NS prefix receiver woes
« Reply #7 on: April 16, 2012, 03:40:52 PM »
If they won't shut I think the factory "used" to fit them for a price. If it shuts and is loose I think they won't. You'd have to shim.
Logged

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: NS prefix receiver woes
« Reply #8 on: April 16, 2012, 06:40:38 PM »
Quote from: fluffyphydeaux2010 on April 16, 2012, 03:39:49 PM
don't want to ruin a barrel. I'll just see about trading for another SB2
Why don't you just keep it.  You'll eventually have a barrel that won't fit anything except that receiver.  I had that happen to me.
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: NS prefix receiver woes
« Reply #9 on: April 17, 2012, 12:05:19 AM »
That's why I keep three spare SB2s around.  Yesterday, I got a Versa-Pack  .410/.22 from boatboy.  The shotgun barrel was on the original frame.  I tried a spare SB2 because it was the only one without a hammer spur.  The .22 barrel jumped right on.  I shot it a few times and the rifle firing pin strike was a tad inside the rim, but it fired fine.  I reversed barrels and the .410 fit fine.  I shot a few 3 inch magnum loads and everything worked perfectly.

I agree with OldSchoolRanger, keep the frame.  One day you'll be glad you have it.  I had a barrel that wouldn't lock up on anything.  Just when I was about to work on it, I picked up another frame.  End of problem.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: NS prefix receiver woes
« Reply #10 on: April 17, 2012, 03:11:48 PM »
Often it is that barrels are 'too loose' and you have to shim. I bet there are a bunch of guys here that would be GLAD to have your 'problem'; and end up with a lock up like a bank vault. If I was a gross opportunist I would have been all over you to sell me that action  ;) ; you keep it for now. Dollars to donuts you will be glad you did!
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974
Pages: [1]   Go Up
« previous next »