« previous next »
Pages: [1]   Go Down

Author Topic: Availability of New Carbine Stock Sets  (Read 1027 times)

0 Members and 1 Guest are viewing this topic.

Offline McLernon

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1217
Availability of New Carbine Stock Sets
« on: January 20, 2007, 10:18:41 AM »
Does anyone know the availabilty of stock sets that they are using for the new 45LC carbine and will the fore-stock fit other barrels? I don't know if the distance from the spacer to the hold down screw is the same as other Handi's. Anybody know? ::) ::)

Mc
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #1 on: January 20, 2007, 10:27:06 AM »
The butt stock appears to be the same as the BC and Target, the forend appears to be shorter tho, possibly the same as the older schable forend, but of checkered walnut. I don't see them changing the position of the forend stud on the carbine, the BC and Target forends work fine on Handi barrels and vice versa.

As far as availability, I doubt very much they'll be available before the production run of the complete rifles as all will be used for that purpose before they sell the components, a call to Jenn would answer that question, I'm sure. She did tell me that the sights won't be available for quite a while, the forend will probably be the same.

Tim

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Cookiemann

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1749
  • Apple Valley, MN
Re: Availability of New Carbine Stock Sets
« Reply #2 on: January 20, 2007, 10:51:23 AM »
Last week, when I spoke with CS, they said the butt stock is the same as the BC.  Only difference will be the forend and I think you are right Tim.  It looks like a standard schnable with checkering to me, too.

cookie
Logged
NOT ON MY WATCH

"AIM small...MISS small"

Offline kng

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 127
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #3 on: August 27, 2009, 08:50:39 AM »
Does anyone know where I can order one of these 45LC stock sets?  I'd like to put it on the ss1-022 (.22 with iron sights).

Thanks,
-Kyle
Logged
H&R/NEF:  .243, .308, .270, .357, .357 Talo, 45 BC Carbine, 45-70 Talo, .50 cal, .22/20 Versa, .22 Sportster
12 ga. turkey, 20 ga. Topper Model 88, .410, 20 ga. Ultra Light Slug Hunter, 20 ga. Tamer

Offline Otony

  • GBO Supporter
  • Trade Count: (10)
  • Avid Poster
  • *****
  • Posts: 123
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #4 on: August 27, 2009, 10:04:56 AM »
I have a set coming from one of our fellow board members that is going on my .30-30 Handi. It will sport a steel forend spacer (and eventually a steel trigger guard), and currently wears a Williams Foolproof peep. That should make for a very elegant single shot rifle, one that H&R ought to offer on a regulard basis. Better yet would be a 24 or 26" barrel!

Good stuff Maynard!!
Logged
Otony
"Meglio vivere un giorno da leone che cento anni da pecora"

Offline AtlLaw

  • Moderators
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 6469
  • Gender: Male
  • A good woman, nice bike and fine guns!
Re: Availability of New Carbine Stock Sets
« Reply #5 on: August 27, 2009, 10:51:36 AM »
Well, I could use one or two of those shorter fore arms my own darn self... for my handi's I mean!
Logged
Richard
Former Captain of Horse, keeper of the peace and interpreter of statute.  Currently a Gentleman of leisure.
Nemo me impune lacessit

                      
Support your local US Military Vets Motorcycle Club

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #6 on: August 27, 2009, 10:57:16 AM »
Quote from: kng on August 27, 2009, 08:50:39 AM
Does anyone know where I can order one of these 45LC stock sets?  I'd like to put it on the ss1-022 (.22 with iron sights).

Thanks,
-Kyle

From H&R, part numbers are in the FAQs on the retail parts price list page.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 30gman

  • Trade Count: (12)
  • Member
  • *
  • Posts: 88
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #7 on: August 27, 2009, 11:47:36 AM »
I ordered a buttstock and forearm earlier this week and was told they were in stock. I guess we will see.
Logged

Offline kng

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 127
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #8 on: August 27, 2009, 03:23:36 PM »
Thanks!  Are the 2007 prices current ($68.90 and $31.88)?  What about the metal buttplate? 
Logged
H&R/NEF:  .243, .308, .270, .357, .357 Talo, 45 BC Carbine, 45-70 Talo, .50 cal, .22/20 Versa, .22 Sportster
12 ga. turkey, 20 ga. Topper Model 88, .410, 20 ga. Ultra Light Slug Hunter, 20 ga. Tamer

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #9 on: August 27, 2009, 04:43:00 PM »
As of Oct 2008 forend has gone up to $32.85, butt was still the same, comes with butt plate.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #10 on: August 28, 2009, 01:13:51 AM »
Quote from: McLernon on January 20, 2007, 10:18:41 AM
Does anyone know the availabilty of stock sets that they are using for the new 45LC carbine and will the fore-stock fit other barrels? I don't know if the distance from the spacer to the hold down screw is the same as other Handi's. Anybody know? ::) ::)

Mc

I have a set on my .357.  They fit fine.
Logged
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline kng

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 127
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #11 on: August 28, 2009, 12:18:34 PM »
Just ordered the following:

RO3271 $69.95 BC Stock
RO3944 $32.85 BC Carbine forend

He said the stock didn't come with the buttplate.  At first, he said it was $5.40, then he said he couldn't sell it because it had to be fitted.   ??? I hope the stock comes with the buttplate, or else I'm in trouble.

Thanks for the help!  I've been a Handi-Holic for years, I just didn't know there was a forum for "us".!   :D

-Kyle
Logged
H&R/NEF:  .243, .308, .270, .357, .357 Talo, 45 BC Carbine, 45-70 Talo, .50 cal, .22/20 Versa, .22 Sportster
12 ga. turkey, 20 ga. Topper Model 88, .410, 20 ga. Ultra Light Slug Hunter, 20 ga. Tamer

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #12 on: August 28, 2009, 01:14:24 PM »
It does have to be fitted, but it's always come with the stock already fitted and installed. But they've changed some things like hammer spurs don't come with accessory barrels any more, just another cost cutting measure. But I'd be surprised if it doesn't come with it, it's listed as a factory only part, so you can't order it, you were likely just told wrong, seems to happen far too often.  :-\

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 30gman

  • Trade Count: (12)
  • Member
  • *
  • Posts: 88
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #13 on: August 28, 2009, 02:03:13 PM »
Today I received the 45lc-BC stock and forearm that I ordered this past Monday. Thought that was good shipping time considerng they told me 10 days to two weeks. It came with the steel buttplate installed. Answers the question, do they have them in stock.
Logged

Offline kng

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 127
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #14 on: August 28, 2009, 02:32:51 PM »
30gman,

That's great news!  What caliber are you putting them on?  Let's see some pics!

-Kyle
Logged
H&R/NEF:  .243, .308, .270, .357, .357 Talo, 45 BC Carbine, 45-70 Talo, .50 cal, .22/20 Versa, .22 Sportster
12 ga. turkey, 20 ga. Topper Model 88, .410, 20 ga. Ultra Light Slug Hunter, 20 ga. Tamer

Offline 30gman

  • Trade Count: (12)
  • Member
  • *
  • Posts: 88
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #15 on: August 28, 2009, 02:53:20 PM »
Quote from: kng on August 28, 2009, 02:32:51 PM
30gman,

That's great news!  What caliber are you putting them on?  Let's see some pics!

-Kyle

Installed on a 30-30 for now,They look great. Think I am going to put them on a sportster if I can find one. I would shoot it a lot more.
Have to wait for pictures till my daughter visits from Alaska Thanksgiving.She is my computer instructor. I have half heartedly tried all the instructrions on this forum and others without any sucess. Half heartedly may be the key word! I may be to lazy to really try to figure it out.
30gman

quote fixed by quick
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #16 on: August 28, 2009, 03:03:13 PM »
I can post the pics if you have em, PM me if you want to email them to me.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 30gman

  • Trade Count: (12)
  • Member
  • *
  • Posts: 88
  • Gender: Male
Re: Availability of New Carbine Stock Sets
« Reply #17 on: August 28, 2009, 03:27:20 PM »
Thanks Tim, but the wood was delivered just about dark this evening. I have no pictures yet. I may try to post pictures again tomorrow. I have all the instructions, just have to figure it out.
30gman
Logged
Pages: [1]   Go Up
« previous next »