Author Topic: need help with rings for new CZ (Read 701 times)

astrix · « **on:** May 22, 2006, 12:12:27 PM »

Howdy,I have a 527 Varmint in .17 rem. on
the way and would like to top it with a Nikon
Buckmaster 4x12x50 and was wondering if
anyone knew what rings I'll need to get it
to fit.Judging by the fit on my 527 American
with a 6x18x40,I don't think the CZ rings will
do it.Any help would be appreciated.
gary

popplecop · « **Reply #1 on:** May 24, 2006, 07:22:19 AM »

I used Millet 22 rings on my CZ, worked fine. I happened to have the rings laying around, now to get out and shoot it.

farmerboyMT · « **Reply #2 on:** May 24, 2006, 03:39:45 PM »

I've got a 527 lux that I mounted a Burris 8x32x42 mil dot on. I had to use Millet's Angle-Loc rings. I used the medium ( .586 ) height. I think you might have to go to the high rings ( .699 1 inch tube - .623 30mm tube - I don't know the tube diameter). If you haven't found a solution yet you may want to consider them. They do make sighting in a lot easier. Burris scopes have so little windage adjustment that I used the ring adjustment to get things lined up on the borescope before I could fine tune with the scope adjustment.
Good Luck
Bryan Danley

astrix · « **Reply #3 on:** May 25, 2006, 05:53:38 AM »

Ordered a set of the high milletts.Thanks for
the info.
gary