« previous next »
Pages: [1]   Go Down

Author Topic: Cylinder Bore 12Ga Shotgun barrels  (Read 1095 times)

0 Members and 1 Guest are viewing this topic.

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Cylinder Bore 12Ga Shotgun barrels
« on: January 26, 2012, 05:32:33 AM »
I just finished looking through the H&R, barrel accessory program site for a plain (non screw in choke) barrel in cylinder bore.  I couldn't find it listed as an option, I know H&R use to make them, since I have a older Tracker (with iron sights) in that choke.

My questions are:
Are they still available, even though their not listed on their website?  Did H&R ever make a cylinder bore 12Ga barrel with a plain bead sight? 
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Cylinder Bore 12Ga Shotgun barrels
« Reply #1 on: January 26, 2012, 07:00:25 AM »
OSR,
 
Not sure if H&R or NEF ever made cylinder bore barrel with a bead sight.   I would however, be a quick project to buy an 27.5" barrel and cut it too the length you want and install a new bead.  You probably need to cut off about 2" to remove the entire choke.  You can verify the choke has been removed by measuring the ID of the barrel after trimming.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline hoytcanon

  • If there is a season for it... I have a pot to cook it in.
  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
  • Handi's and Henry's... a perfect partnership!
Re: Cylinder Bore 12Ga Shotgun barrels
« Reply #2 on: January 26, 2012, 01:14:25 PM »
Quote from: bikerbeans on January 26, 2012, 07:00:25 AM
OSR,
 
Not sure if H&R or NEF ever made cylinder bore barrel with a bead sight.   I would however, be a quick project to buy an 27.5" barrel and cut it too the length you want and install a new bead.  You probably need to cut off about 2" to remove the entire choke.  You can verify the choke has been removed by measuring the ID of the barrel after trimming.BB

Yeah That ~ Just cut down any H&R shotgun barrel to remove the choke... any gunsmith/machinist can do this for very little cost.
Logged
Hoyt Handi's; Ultra Black .22 K-Hornet Shorty, Black Synthetic K-Hornet Shorty & Nickel .410 Combo (sons), Ultra Granite Grey .22 BR Rem, Ultra Nutmeg .223 & .30/30 Shorty Combo (sons), Ultra Forest .223/7mm-08 Shorty Combo, Ultra Forest .243/.308 Combo, Ultra Nutmeg .243/.308 Combo (sons),  Jacaranda/Cocobolo .30/30 & 7.62X39 Shorty Combo, Ultra Black/Stainless .260 Rem Stub, Ultra Black/Stainless .338 Federal Stub,  Ultra Grey .358 Win, Ultra Grey .35 Whelen, Walnut/Cocobolo Mannlicher .357 MAX, Buffalo Classic Mannlicher .44 Mag Shorties w/NDS-38 peeps (X2; Sons & mine), Ultra Grey Stainless .45/70 & .243 & 20 Gauge Combo, Buffalo Classic 26" .45/70, 9.3X74R Mannlicher, Synthetic Nickel .410 & .30/30 & Versa Pak .22 LR Shorty Combo, Ultra Forest/Cocobolo 12 Gauge 3.5" Turkey; Most scoped with DNZ or Dura Sight one-piece bases and Mueller, Hawke or Nikon scopes... several with Skinner Peeps and Williams Fire Sight ramps.

Offline Markus

  • Moderators
  • Moderator
  • Trade Count: (15)
  • Senior Member
  • *****
  • Posts: 1767
  • Gender: Male
Re: Cylinder Bore 12Ga Shotgun barrels
« Reply #3 on: January 26, 2012, 01:34:28 PM »
If they ever made one with a cylinder bore and bead sight I've never heard of it. Lots of home brew shortys though.
Logged
PROUD REDNECK CONSERVATIVE

I'd much rather be remembered for being a great shot than having the most expensive gun

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Cylinder Bore 12Ga Shotgun barrels
« Reply #4 on: January 26, 2012, 04:11:03 PM »
They did, I've shot one.  It's called a Tracker I.  ;)  Oh, and they stopped production years ago... 8(
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: Cylinder Bore 12Ga Shotgun barrels
« Reply #5 on: January 26, 2012, 06:48:06 PM »
Thanks for all the answers.

tacklebury - Did the Tracker I, have a bead sight?  I ask because I have a 24" Tracker barrel which I purchased new in 1995, but it has iron (rifle type) sights.
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Cylinder Bore 12Ga Shotgun barrels
« Reply #6 on: January 27, 2012, 12:55:37 AM »
OSR,
 
IIRC, the Tracker I had factory front and rear open sights, at least the 12 ga model I just to have was shipped that way.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Cylinder Bore 12Ga Shotgun barrels
« Reply #7 on: January 27, 2012, 10:52:01 AM »
Quote from: OldSchoolRanger on January 26, 2012, 06:48:06 PM
Thanks for all the answers.

tacklebury - Did the Tracker I, have a bead sight?  I ask because I have a 24" Tracker barrel which I purchased new in 1995, but it has iron (rifle type) sights.

Rifle sights.  It was the real metal version Williams style ramp with no fiberoptics because it was long before they did those.  ;)   Guy I know has it and I'm doing my best to get him to sell it to me.  He'll never shoot it, but he's a tough one to let go of any gun except to family.  hehe
 
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Cylinder Bore 12Ga Shotgun barrels
« Reply #8 on: January 29, 2012, 03:36:41 AM »
OSR, I have the pre-Tracker I, 'Buck' barrel c/w open sights. Just to know, I tried 12ga. field loads and if I pull it up and shoot it like a bird barrel gun it throws the shot fine. I had thought it would be a swap barrel set-up,, but I havent put the bird barrel back on since.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974
Pages: [1]   Go Up
« previous next »