« previous next »
Pages: [1]   Go Down

Author Topic: Walnut 32 pounder  (Read 2177 times)

0 Members and 1 Guest are viewing this topic.

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Walnut 32 pounder
« on: August 30, 2011, 05:51:03 AM »
A friend gave me a nice piece of walnut a while back.  It has been sitting around in my wood stack for a long time.  I finally decided to do this with it.
I'm calling it a 1/5th scale 32 pounder.  Barrel is 21.5" long.
It turned out pretty cool. 8)
Zulu
 








Logged
Zulu's website
www.jmelledge.com

Offline RocklockI

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2747
  • Gender: Male
  • Morko and Me
Re: Walnut 32 pounder
« Reply #1 on: August 30, 2011, 06:51:01 AM »
I like the natural finish on the barrel . Very nicely done as always .
Gary
Logged
"I've seen too much not to stay in touch , With a world full of love and luck, I got a big suspicion 'bout ammunition I never forget to duck" J.B.

Offline 1Southpaw

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 642
  • Gender: Male
  • Let Freedom ring
Re: Walnut 32 pounder
« Reply #2 on: August 30, 2011, 07:00:39 AM »
Beautiful as always . Dito on Garys comment about the natural finish on the walnut .
Logged
Left Handed people are in their right mind .

Offline gulfcoastblackpowder

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 808
Re: Walnut 32 pounder
« Reply #3 on: August 30, 2011, 07:42:25 AM »
With such a fine looking piece of wood, it would be a crime to hide it behind paint.  Looks fantastic!
Logged

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12621
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Walnut 32 pounder
« Reply #4 on: August 30, 2011, 09:38:11 AM »
Quote from: gulfcoastblackpowder on August 30, 2011, 07:42:25 AM
With such a fine looking piece of wood, it would be a crime to hide it behind paint.  Looks fantastic!

There is a time and place for paint this is not it!!!
Logged

Offline DaveSB

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 195
  • Gender: Male
Re: Walnut 32 pounder
« Reply #5 on: August 30, 2011, 10:03:28 AM »
wow that's pretty..
Logged

Offline seacoastartillery

  • GBO Sponsor
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2853
  • Gender: Male
    • seacoastartillery.com
Re: Walnut 32 pounder
« Reply #6 on: August 30, 2011, 10:05:49 AM »
     Zulu,  You have outdone yourself by two or three levels of excellence this time!  I really like the contrast in color between the various woods.  I think this will become my new favorite.  Formerly,
the Wood, Front-Pintle, Barbette Carriage was my personal favorite.  It's very clear that you are going for customer or viewer delight rather than mere satisfaction.

Love it!!

Tracy

Logged
Smokin' my pipe on the mountings, sniffin' the mornin'-cool,
I walks in my old brown gaiters along o' my old brown mule,
With seventy gunners be'ind me, an' never a beggar forgets
It's only the pick of the Army that handles the dear little pets - 'Tss! 'Tss!

From the poem  Screw-Guns  by Rudyard Kipling

Offline carmy53

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 196
Re: Walnut 32 pounder
« Reply #7 on: August 30, 2011, 01:04:03 PM »
All I can say is WOW!!
Logged

Offline gunsonwheels

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 405
  • Gender: Male
Re: Walnut 32 pounder
« Reply #8 on: August 30, 2011, 01:34:12 PM »
It is really pretty scarey what you would do with a full compliment of metal working tools in addition to those you alreay have...  Very nice work!!!
 
George
Logged

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: Walnut 32 pounder
« Reply #9 on: August 30, 2011, 02:08:58 PM »
Thanks for the comments.  I like it too.  It's sitting on my desk right now but will soon be on my website.
Gunsonwheels,
I really don't have any metal working skills other than beating something on an anvil.  At least I can do that and weld a little.
I would really like to learn, but my present location will simply not allow a bigger shop and moving right now is out of the question.  I own my house and I have no job. :-\
Zulu
 
Logged
Zulu's website
www.jmelledge.com

Offline gunsonwheels

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 405
  • Gender: Male
Re: Walnut 32 pounder
« Reply #10 on: August 30, 2011, 05:50:19 PM »
It's too bad we don't live closer... I have all these tools and am time limited to use them.  If you were closer and helping put some use on them, I could feel less guilty about having them.  :-\   As far as the skills are concerned... think wood and cut/turn/shape/join metal... it's really all the same except the metal machines typically have a few more levers and knobs to learn before you can "full speed ahead".  I too learned on wood before going on to metal and it all translates much easier than you might think... particularly for someone with your skills and attention to detail.  I am truly sorry but I am not about to move to Texas either... upon retirement (from the Seattle, WA area) I could hardly wait to get back into the mountain west where I was raised because of the climate (weather and political), very low population and wide open spaces.
Logged

Offline NinjaToes

  • Trade Count: (0)
  • Member
  • *
  • Posts: 72
  • Gender: Male
Re: Walnut 32 pounder
« Reply #11 on: August 31, 2011, 12:25:51 AM »
Looks awesome, nice work  8)
Logged
Some people are like a Slinky...

Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.

Offline Mike H.

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 207
Re: Walnut 32 pounder
« Reply #12 on: August 31, 2011, 01:47:57 AM »
Absolutely stunning work!
Logged

Offline oltom

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 135
  • Gender: Male
Re: Walnut 32 pounder
« Reply #13 on: August 31, 2011, 02:15:03 AM »
nice work!....just needs a 'liner' and fire it! ::)
Logged
"MORE booze!"

Offline Cannoneer

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3950
Re: Walnut 32 pounder
« Reply #14 on: August 31, 2011, 03:03:09 AM »
Now, Zulu, you well know that this is kind of a problematic situation for me. What I mean is, I've got to watch my remarks, because I certainly don't want to induce any uncontrollable (and possibly harmful) expansion of your cranium; so I'll just say that it looks pretty good. :D :P   
Logged
RIP John. While on vacation July 4th 2013 in northern Wisconsin, he was ATVing with family and pulled ahead of everyone and took off at break-neck speed without a helmet. He lost control.....hit a tree....and the tree won.  He died instantly.

The one thing that you can almost always rely on research leading to, is more research.

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: Walnut 32 pounder
« Reply #15 on: August 31, 2011, 03:16:28 AM »
Quote from: gunsonwheels on August 30, 2011, 05:50:19 PM
It's too bad we don't live closer... I have all these tools and am time limited to use them.  If you were closer and helping put some use on them, I could feel less guilty about having them.  :-\   As far as the skills are concerned... think wood and cut/turn/shape/join metal... it's really all the same except the metal machines typically have a few more levers and knobs to learn before you can "full speed ahead".  I too learned on wood before going on to metal and it all translates much easier than you might think... particularly for someone with your skills and attention to detail.  I am truly sorry but I am not about to move to Texas either... upon retirement (from the Seattle, WA area) I could hardly wait to get back into the mountain west where I was raised because of the climate (weather and political), very low population and wide open spaces.

I wish I knew someone with metal working equipment that lived close to me also.
For the past month there has been an ad on Craig's List about a guy that has a fully equipped machine shop that will rent it to you for $30 an hour.  He will also give instruction.  I have sent 5 emails to him.  I only heard back from him once and only know that he is very close to where I live but I have no address or phone number.  He just dosen't answer my emails.
I think $30 an hour is pretty reasonable for use of a fully equipped shop.
Oh well. :P
Zulu
Logged
Zulu's website
www.jmelledge.com

Offline Victor3

  • GBO Supporter
  • Trade Count: (22)
  • Senior Member
  • *****
  • Posts: 4241
Re: Walnut 32 pounder
« Reply #16 on: August 31, 2011, 04:56:21 AM »
 Zulu,
 
 The medium is secondary; you have a natural ability that would easily transfer to machining.
 
 I've recently interviewed ~20 students at local trade schools, looking for prospects to fill entry-level machinist positions at the aerospace factory I work in. In addition to what they've learned in their formal training, I make it a point to ask about their hobbies. I spoke to a kid who built custom VW motors, one who designed/built iron fences from scratch and another who knew quite a bit about woodworking.
 
 They're all way more likely to become real machinists than the guys who've never built anything more complex than a hamburger.  :)
Logged
"It is a capital mistake to theorize before one has data. Insensibly, one begins to twist facts to suit theories, instead of theories to suit facts."

Sherlock Holmes

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: Walnut 32 pounder
« Reply #17 on: August 31, 2011, 05:43:53 AM »
I did turn all 32 pieces of a chess set out of aluminum on a metal lathe in high school. ;D
That was a long time ago. :-\
Zulu
Logged
Zulu's website
www.jmelledge.com

Offline seacoastartillery

  • GBO Sponsor
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2853
  • Gender: Male
    • seacoastartillery.com
Re: Walnut 32 pounder
« Reply #18 on: August 31, 2011, 06:16:09 AM »
     Gee Zulu, I guess maybe you would probably like our arrangement with RocklockI.  Gary has full access to a small, but completely equipped machine shop at Seacoast Artillery's World Headquarters in Broomfield.  If you think $30 per hour is reasonable, which it is, then you would just love bringing us two breakfast burritos every other week, like your buddy, as payment for total shop access!!  Never have seen any lettuce, just potato, egg and cheeze.   :) :)

Tracy and Mike
Logged
Smokin' my pipe on the mountings, sniffin' the mornin'-cool,
I walks in my old brown gaiters along o' my old brown mule,
With seventy gunners be'ind me, an' never a beggar forgets
It's only the pick of the Army that handles the dear little pets - 'Tss! 'Tss!

From the poem  Screw-Guns  by Rudyard Kipling

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: Walnut 32 pounder
« Reply #19 on: August 31, 2011, 06:25:39 AM »
Quote from: seacoastartillery on August 31, 2011, 06:16:09 AM
     Gee Zulu, I guess maybe you would probably like our arrangement with RocklockI.  Gary has full access to a small, but completely equipped machine shop at Seacoast Artillery's World Headquarters in Broomfield.  If you think $30 per hour is reasonable, which it is, then you would just love bringing us two breakfast burritos every other week, like your buddy, as payment for total shop access!!  Never have seen any lettuce, just potato, egg and cheeze.   :) :)

Tracy and Mike

Full use of your shop?
Chains you to the oars in his sail boat?
Who drove to Montana last week?
No lettuce?
I wouldn't loan him any money. ;D
Zulu
Logged
Zulu's website
www.jmelledge.com

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12621
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Walnut 32 pounder
« Reply #20 on: August 31, 2011, 09:20:39 AM »
I think I am going to have to re-evaluate my standards and criteria for Kewpie for  Dom and Zulu.  When work like this and the Dahlgren Dom just posted is standard fare for them then it is hard to say this is a cut above...but all there work is a cut above...it does give the rest of us something to strive for.

Great job Z!

Logged

Offline gulfcoastblackpowder

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 808
Re: Walnut 32 pounder
« Reply #21 on: August 31, 2011, 10:01:10 AM »
Problem solved.  When these guys top themselves (I'd add Seacoast in with those two), here's a Super Kewpie (I could make a better one with a better Kewpie image).
Logged

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: Walnut 32 pounder
« Reply #22 on: August 31, 2011, 11:33:23 AM »
Wow!
In spite of Cannoneer trying to tone it down, I still feel my head getting bigger.
Thanks to everyone!
Zulu Bighead
Logged
Zulu's website
www.jmelledge.com

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12621
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Walnut 32 pounder
« Reply #23 on: August 31, 2011, 12:25:47 PM »
There is only one kewpie, and all others are pretenders.... :)
Logged

Offline Cannoneer

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3950
Re: Walnut 32 pounder
« Reply #24 on: September 01, 2011, 06:02:35 AM »
Quote from: Zulu on August 31, 2011, 11:33:23 AM
Wow!
In spite of Cannoneer trying to tone it down, I still feel my head getting bigger.
Thanks to everyone!
Zulu Bighead

I knew your noggin was still going to swell up, even though I took the proper course, and avoided extravagant praise. :P
Logged
RIP John. While on vacation July 4th 2013 in northern Wisconsin, he was ATVing with family and pulled ahead of everyone and took off at break-neck speed without a helmet. He lost control.....hit a tree....and the tree won.  He died instantly.

The one thing that you can almost always rely on research leading to, is more research.

Offline dominick

  • GBO Sponsor
  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1367
  • Gender: Male
    • Black Powder Cannons & Mortars
Re: Walnut 32 pounder
« Reply #25 on: September 01, 2011, 08:50:00 AM »
Zulu,  Very nice work!  I like the finish on the barrel, a very nice touch.   Dom
Logged
Pages: [1]   Go Up
« previous next »