« previous next »
Pages: [1]   Go Down

Author Topic: t/c pa hunter barrel  (Read 1525 times)

0 Members and 1 Guest are viewing this topic.

Offline trkyman1

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 154
t/c pa hunter barrel
« on: January 03, 2010, 11:03:47 AM »
anyone know where I can get a replacement barrel for a t/c pa hunter? I have the 32 inch but I want to replace it with a 28 Inch. Will the t/c hawken barrels fit in the pa hunter?
Logged

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
Re: t/c pa hunter barrel
« Reply #1 on: January 03, 2010, 11:47:33 AM »
Yep: a hawkens barrel will fit a Pa hunter stock
Logged

Offline bubba.50

  • GBO Supporter
  • Trade Count: (151)
  • Senior Member
  • *****
  • Posts: 1170
  • Gender: Male
Re: t/c pa hunter barrel
« Reply #2 on: January 03, 2010, 02:09:46 PM »
hawken=octagon, pa hunter=round. think it would take some inlettin'. for what it's worth, bubba.
Logged
fetch the hammer maggie-they's a bee on the baby's head!

Offline flintlock

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1405
  • Gender: Male
Re: t/c pa hunter barrel
« Reply #3 on: January 03, 2010, 02:13:52 PM »
Seems that I remember the PA Hunter as octagan to round...

Is anything wrong with the current barrel???
Logged

Offline trkyman1

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 154
Re: t/c pa hunter barrel
« Reply #4 on: January 04, 2010, 03:11:37 AM »
no i just wanted a 28 inch with a 1-48 twist or faster.
Logged

Offline deadrabbit

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 126
Re: t/c pa hunter barrel
« Reply #5 on: January 04, 2010, 04:04:16 PM »
My PA Hunter is full octagon, a 50 cal round ball barrel.  It says the name on the barrel so at least some of them were made full octagon.  Maybe it depends on the stock somehow? 

There are carbine barrels that fit them too.  Is it the TC White Mountain barrels that fit or some other name?
Logged

Offline bubba.50

  • GBO Supporter
  • Trade Count: (151)
  • Senior Member
  • *****
  • Posts: 1170
  • Gender: Male
Re: t/c pa hunter barrel
« Reply #6 on: January 04, 2010, 04:20:05 PM »
my dum-butt mistake. my gun is a new englander-duh! and yeh, white mountain carbine was 1/2 octagon, 1/2 round 21in barrel don't know if one inch or 15/16 but breech and wedge should work if it's the right measurement across the flats. good luck with your good gun, bubba.
Logged
fetch the hammer maggie-they's a bee on the baby's head!

Offline coyotejoe

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 2937
  • Gender: Male
Re: t/c pa hunter barrel
« Reply #7 on: January 05, 2010, 05:11:54 AM »
PM sent.
Logged
The story of David & Goliath only demonstrates the superiority of ballistic projectiles over hand weapons, poor old Goliath never had a chance.

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
Re: t/c pa hunter barrel
« Reply #8 on: January 05, 2010, 06:49:58 AM »
     PA Hunter and White Mountain Carbine barrels do interchange, at least mine do.  Both are 1/2 Octagon and 1/2 Round.  A Hawken might fit too, I haven't tried that one.  As long as the wedge pin and Escutcheon are spaced the same it should fit even though it's full octagon.  Now the Hawken barrel is probabley going to be a 1:48 twist instead of the 1:66 in the PA Hunter.
GOOD SHOOTIN', Walt  ;)
Logged

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
Re: t/c pa hunter barrel
« Reply #9 on: January 07, 2010, 02:03:50 PM »

here is a Pa. hunter stock that the barrel and lock was a used to be on a t/c hawkens from the middle 70's, fits no problem I did use the single trigger of the Pa. hunter only because the double set triggers on the hawken will not fit the pa hunter stock
this is a early barrel 1 in 48 twist loves heavy charges of goex 3F 90 to 100 grains behind a patched RB.
The frizzen on the t/c lock comes from a lyman frizzen this frizzens has well over 700 rounds on it still sparks like new
Logged

Offline trkyman1

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 154
Re: t/c pa hunter barrel
« Reply #10 on: January 08, 2010, 02:31:05 AM »
Nice. Is it for sale?
Logged

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
Re: t/c pa hunter barrel
« Reply #11 on: January 08, 2010, 03:02:48 AM »
NOPE:
Logged
Pages: [1]   Go Up
« previous next »