« previous next »
Pages: [1]   Go Down

Author Topic: Another barrel fitting question...  (Read 294 times)

0 Members and 1 Guest are viewing this topic.

Offline STUMPJMPR

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1037
Another barrel fitting question...
« on: October 12, 2008, 11:32:12 AM »
The 2nd frame i have has side to side play on all of my actions but seems to like up tight on a .002 feeler gauge... I haven't checked the latch engagement but it doesn't seem like this would fix the problem... So what can I do to fix that???
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Another barrel fitting question...
« Reply #1 on: October 12, 2008, 11:56:19 AM »
If the barrel is lose when locked up without the forend on and the latch engagement is good, it needs to be shimmed. Ideally for best accuracy no gap should exist at the barrel to standing breech, if you try a feeler blade at the very top of a well fitted barrel, it should lock tight on aluminum foil which is ~.0005" thick.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »