« previous next »
Pages: [1]   Go Down

Author Topic: fitting barrels  (Read 447 times)

0 Members and 1 Guest are viewing this topic.

Offline caprocker

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
  • Gender: Male
fitting barrels
« on: January 17, 2007, 06:07:48 AM »
Someone explain to me the process behin dhte fitting of barrels please....Is it necessary to send in an SB2 receiver if you decide to buy a new barrel for it??
Logged
I've got a long list of real good reasons for all the things I've done.

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: fitting barrels
« Reply #1 on: January 17, 2007, 06:10:26 AM »
cap

All the info you will need to have for barrel fitting is in the FAQs at the top of the CF forum page and yes you will need to send in a frame to have a new barrel fitted at the factory .

stimpy
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline caprocker

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
  • Gender: Male
Re: fitting barrels
« Reply #2 on: January 17, 2007, 06:12:19 AM »
thanks stimp..i guess i got in a hurry...what about if i were to buy a barrel second hand off of say this website...would it need to be sent in to the factory to be fitted?
Logged
I've got a long list of real good reasons for all the things I've done.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: fitting barrels
« Reply #3 on: January 17, 2007, 06:32:05 AM »
H&R NEF won't fit a used barrel to our frame, they'll only fit a new barrel when ordered. We have to do our own fitting of used barrels or have our gunsmith do it. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »