« previous next »
Pages: [1]   Go Down

Author Topic: see thru mounts  (Read 362 times)

0 Members and 1 Guest are viewing this topic.

Offline newhunter06

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
see thru mounts
« on: December 27, 2006, 09:50:50 AM »
has anyone used see thru scope mounts for the 45/70 handi? if so which ones and how high? thanks for the help
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: see thru mounts
« Reply #1 on: December 27, 2006, 09:57:36 AM »
See thru mounts IMO, are way too high, specially with a stock made for use with iron sights, which would be the only reason I could possibly want to use see thrus. Way back when scopes were less reliable than they are now, see-thrus were well liked, but I just don't see the need for them now. With the scope rail mounted, I can't even see the rear sight on my Hornet over the rail.

I use medium or high Burris Signature Zee rings almost exclusively, mediums on most, but some scope will require highs to clear the hammer.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline newhunter06

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: see thru mounts
« Reply #2 on: December 27, 2006, 10:14:50 AM »
my stepfather is giving me a leupold, and i dont know which one but it is a 3x9x40mm would i need the med or high mounts?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: see thru mounts
« Reply #3 on: December 27, 2006, 10:45:08 AM »
I just mounted a 3-9X40 VX-1 to my 308 bull barrel, used medium sig zees.

Tim

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: see thru mounts
« Reply #4 on: December 27, 2006, 11:07:29 AM »
different rings manufacturers use different hieghts for thier low, medium, high, extra high designations but I agree with Quick, for a general answer the mediums should work fine....<><.... :)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline newhunter06

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: see thru mounts
« Reply #5 on: December 27, 2006, 11:10:17 AM »
 like always thanks for the good advise tim and everyone!
Logged
Pages: [1]   Go Up
« previous next »