Author Topic: Question on new extractor type barrels  (Read 449 times)

0 Members and 1 Guest are viewing this topic.

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
Question on new extractor type barrels
« on: December 15, 2006, 08:09:07 PM »
I saw a new BC in a shop the other day, it had an extractor instead of an ejector.  Do these mechanically extract or is it a spring system?  Do they still have the stuck case issues of old?
God, Family, and guns, in that order!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Question on new extractor type barrels
« Reply #1 on: December 15, 2006, 08:37:43 PM »
There are apparently 2 types of extractors, the late style seems to be better than early extractors since some problems have been reported with the early style.

Tim

http://www.graybeardoutdoors.com/smf/index.php/topic,105864.0.html

http://www.graybeardoutdoors.com/smf/index.php/topic,105497.msg1098297139.html#msg1098297139
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
Re: Question on new extractor type barrels
« Reply #2 on: December 15, 2006, 09:37:28 PM »
Does it activate when the barrel is opened or by a lever?

I couldn't tell by the write-ups if opening the barrel forces the case out or if a leaf spring does.  Sorry for being dense.
God, Family, and guns, in that order!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Question on new extractor type barrels
« Reply #3 on: December 16, 2006, 06:08:32 AM »
Barrel movement causes the extractor to move when the large roll pin is pulled down by the bosses on each side in the frame. The extractor is pushed into the retracted position by the standing breech when the action is closed.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
Re: Question on new extractor type barrels
« Reply #4 on: December 16, 2006, 12:05:12 PM »
So it IS a mechanical push out then, correct?  Sorry, little dense lately.
God, Family, and guns, in that order!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Question on new extractor type barrels
« Reply #5 on: December 16, 2006, 12:08:45 PM »
Yes. ;)
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
Re: Question on new extractor type barrels
« Reply #6 on: December 16, 2006, 12:17:26 PM »
Very nice!  Thanks.
God, Family, and guns, in that order!