« previous next »
Pages: [1]   Go Down

Author Topic: .223 bolt face diameter?  (Read 726 times)

0 Members and 1 Guest are viewing this topic.

Offline rodgervich

  • Trade Count: (0)
  • Member
  • *
  • Posts: 77
.223 bolt face diameter?
« on: April 29, 2003, 10:02:11 AM »
Can someone tell me what the diameter is on a bolt face for a .223 Rem? How much clearance is required for the case head? I'm still working on the Mauser -> .223 conversion and I want to make a ring insert on the bolt face to support the case head instead of letting it flop around on the big 8X57 bolt opening.
Thank you for your help.
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
.223 bolt face diameter?
« Reply #1 on: April 29, 2003, 11:28:46 AM »
I find .390 is the commonly listed face diameter for the 222-223 class cartridges.  Good luck on the project..  from the gunnut69
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline 445supermag

  • Trade Count: (0)
  • Member
  • *
  • Posts: 58
.223 bolt face diameter?
« Reply #2 on: April 30, 2003, 01:32:14 AM »
Check with gun parts. I got mau bolts for 223. They were from browning parts. browning were made in 223 and the bolts had a small face. Also i got  the mag the had a block inside to shorten it and you might as well get the fllower for the 223. That the FN actin brownings
Logged
Pages: [1]   Go Up
« previous next »