« previous next »
Pages: [1]   Go Down

Author Topic: MODEL 5906 EXTRACTION PROBLEM  (Read 806 times)

0 Members and 1 Guest are viewing this topic.

Offline David B.

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
MODEL 5906 EXTRACTION PROBLEM
« on: May 18, 2006, 07:20:11 AM »
I have purchased a used 5906. It has extraction problems. The S&W
factory will not sell me an extractor. (factory installed only).
Does anyone know of a source for extractors for the model 5906?
Has anyone had an extractor problem with the 5906 that has been
solved?

Thanks,
David B.,
Logged

Offline thales

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
MODEL 5906 EXTRACTION PROBLEM
« Reply #1 on: May 25, 2006, 09:18:00 AM »
*


You could try e-gunparts.com, AKA Numrich.  However, S&W lists this part as "factory installed only."  You might consider that there may be a very good reason for this besides S&W trying to be hard to get along with.  The easy way is have S&W install the new extractor.


*
Logged

Offline David B.

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Problem solved
« Reply #2 on: June 05, 2006, 06:24:52 AM »
I replaced the extractor spring and the recoil spring.
I then fired about 70 rounds.
I had absolutly no problems.
I bought the springs from S&W, thanks Jeff.
Logged
Pages: [1]   Go Up
« previous next »