Author Topic: Ruger No. tropical 416  (Read 688 times)

0 Members and 1 Guest are viewing this topic.

Offline POSSUM_56

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Ruger No. tropical 416
« on: July 25, 2005, 02:34:25 PM »
I just bought a ruger no.1 416 rigby and  was wndering if anyone here knows what kind of accuracy i can accept. And also i was going to reload and was going to use barnes 300's around here and was wondering if anyone had velocity's for that bullet i hoping to get to 3000 but is that possible. thanks for any info.

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Ruger No. tropical 416
« Reply #1 on: July 25, 2005, 06:04:25 PM »
It is hard to say what your accuracy will be like. Hopefully it will be very good. I Have a 416 Rigby in my Encore, and I have great accuracy. I am reloading 300 gr. Barnes X bullets in it, but 3000 fps a little high number but you can get close. You will be about 2800fps to 2900 fps.  My Barnes reloading manual has 106 gr. as my min and 111 for the max with Reloader 22.  Hope this helps.
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline BillinOregon

  • GBO Supporter
  • Trade Count: (4)
  • Avid Poster
  • *****
  • Posts: 222
Ruger No. tropical 416
« Reply #2 on: July 26, 2005, 10:30:44 AM »
Possum: Enjoy those high-end loads.
If you want pure shooting pleasure, though, try the RCBS 350-grain gas checked .416 bullet over 50-52 grains of XMP5744. In the No. 1 I had a few years back in .416 Rigby, this load gave me about an inch at 100 yards and was right at 2000 fps. Nice big-bore plinking load for your Rigby, and one that you can shoot off the bench for hours.