« previous next »
Pages: [1]   Go Down

Author Topic: Barrel lenght on HOWA Rifel  (Read 779 times)

0 Members and 1 Guest are viewing this topic.

Offline fuzzy

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 245
  • Gender: Male
Barrel lenght on HOWA Rifel
« on: April 10, 2004, 02:49:27 AM »
Just got a new howa (25-06) mod 1500 didn`t notice how short . the barrel was.  it meaus 19.5"  that seam`s  short for the 25-06 any comment`s on this  thank`s rich  :?
Logged
I rather be over the hill than in it

Offline jhm

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3169
Barrel lenght on HOWA Rifel
« Reply #1 on: April 10, 2004, 05:35:12 AM »
Which howa model did you get?  the web site I looked at only shows the 22 in. barrel for that cal. :D    JIM
Logged

Offline fuzzy

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 245
  • Gender: Male
howa
« Reply #2 on: April 10, 2004, 09:14:30 AM »
it say`s model 1500 on the reciver
Logged
I rather be over the hill than in it

Offline Zachary

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3713
Barrel lenght on HOWA Rifel
« Reply #3 on: April 10, 2004, 11:51:20 AM »
That seems really short.  Howas have 22" barrels on standard cartridges and 24" for magnums.  Seems really odd.  Is is NIB?

Zachary
Logged

Offline Lawdog

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4464
Barrel lenght on HOWA Rifel
« Reply #4 on: April 10, 2004, 01:35:45 PM »
fuzzy,

Any barrel under 24 inches for the .25-06 does not let you get the full benefit of this fine cartridge.  A barrel 19.5 inches is not just short it is ridicules.  Send it back to Howa or get a refund and get a rifle with the proper length barrel.  Lawdog
 :D
Logged
Gary aka Lawdog is now deceased. He passed away on Jan. 12, 2006. RIP Lawdog. We miss you.

Offline dbuck

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 188
Barrel lenght on HOWA Rifel
« Reply #5 on: April 10, 2004, 06:15:31 PM »
Hold the phone everyone, where did you measure the barrel from, did you measure from the crown back past where the receiver starts.  Barrels lengths is measure from the crown to the chamber, not at the beginning of the receiver.  Just checking to see if you measured it right.

Do me a favor and take your tape and measure 22" from the crown and see where it stops and let us know.

dbuck
Logged

Offline fuzzy

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 245
  • Gender: Male
25-06 Barrel
« Reply #6 on: April 11, 2004, 05:29:39 AM »
Ok guy`s from crown back to reciver is 21.25"  from crown back 22" would be the back of chamber But that still seams short to me. Gun was spoze to be NIB got it at a gun show here in ohio no box came with it.that seam`s odd to me beside that gun is very nice scoped it sited it in ,but haven`t had change to put it on a bench at 100' yet to c what it can do
Logged
I rather be over the hill than in it

Offline fuzzy

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 245
  • Gender: Male
update
« Reply #7 on: April 11, 2004, 06:52:23 AM »
did some looking around i have a Howa model 1500 JRS Classic with lam nutmeg stock 22" barrel 1 in 10" twiz guess i didn`t know how to meau barrel lenght  :oops:  other ? does rem still load the 87 grain HP round 4 the 25-06 thank`s 4 your comment`s rich  :D
Logged
I rather be over the hill than in it

Offline dbuck

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 188
Barrel lenght on HOWA Rifel
« Reply #8 on: April 11, 2004, 11:52:34 AM »
fuzzy, I have had several Howa 1500's and like them all.  If you don't want this 25-06 let me know, I live in Ohio also.

dbuck
Logged

Offline fuzzy

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 245
  • Gender: Male
howa 1500
« Reply #9 on: April 15, 2004, 04:57:03 PM »
Going to range tomarrow c how this 25-06 shoots let u all know  :D
Logged
I rather be over the hill than in it

Offline headshooter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
  • Gender: Male
Howa Model 1500
« Reply #10 on: April 21, 2004, 12:38:16 PM »
Fuzzy: I have a Mod 1500 in 300 win mag, it's a tack driver clover leaf groups at 100 yrds.

Action = silky smooth...trigger needed work though a lot of creep, make sure you break that barrel in right a clean it properly, you won't be dissapointed.

I'm a weatherby rifle fan, i bought this rifle at a pawnshop for $200 (synthehic stock)...i'm impressed great rifle for the price

Good luck and good hunting  :D
Logged
Live for today! life''''s too darn short----enjoy the outdoors to it''''s MAX----and teach your children the same values  8)   :sniper:

Offline fuzzy

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 245
  • Gender: Male
25-06 is a shooter
« Reply #11 on: June 23, 2005, 02:03:39 PM »
:oops: I know this is a old post but took the 25-06 on the PD hunt.
anything 400 or better was mine 90 grain wen. this gun can shoot. Rich
Logged
I rather be over the hill than in it
Pages: [1]   Go Up
« previous next »