« previous next »
Pages: [1]   Go Down

Author Topic: CNC shop found for metal forend spacer and possibly trigger guards  (Read 2291 times)

0 Members and 1 Guest are viewing this topic.

Offline SEK_22Hornet

  • GBO Supporter
  • Trade Count: (0)
  • Member
  • *****
  • Posts: 97
CNC shop found for metal forend spacer and possibly trigger guards
« on: July 23, 2012, 05:17:50 PM »
I'm working with a guy right now on getting quotes on the forend spacer and trigger guard made in either brass, steel, aluminum or stainless.  He has my drawings of the forend spacer right now and is working up a quote on that and I'll be sending him photos of the trigger guard tomorrow, to see if he thinks he can do any good with it. Let me know if you are interested in either so I can get a rough idea of how many pieces to tell him we'd be interested in.  No idea of price yet - I'll post a poll once I see his quote (if it looks like we will be interested).  He wasn't interested in shipping to each person, so it would have to be a group order shipped to one person for distribution from there.  He knows this is small quantity and low budget, but says he likes those kind of jobs once in a while. 
Logged

Offline kevinsmith5

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1274
  • Gender: Male
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #1 on: July 24, 2012, 02:49:31 AM »
+1 brass +2 steel

Sent from my Kindle Fire using Tapatalk 2
Logged
If he's carrying a singleshot, don't expect a warning shot!

Offline wganz

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #2 on: July 24, 2012, 06:04:32 AM »
+2 brass
Logged

Offline dorothy daily

  • Trade Count: (30)
  • Contributor
  • ***
  • Posts: 288
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #3 on: July 24, 2012, 06:30:29 AM »
six in brass
Logged

Offline Catshooter45

  • GBO Supporter
  • Trade Count: (22)
  • Contributor
  • *****
  • Posts: 394
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #4 on: July 24, 2012, 07:28:37 AM »
Three, possibly five in brass.
 
 
Cat
Logged

Offline Scibaer

  • Central Michigan, USA, Earth
  • Trade Count: (25)
  • Senior Member
  • *****
  • Posts: 1686
  • FATE FAVORS THE WISE
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #5 on: July 24, 2012, 07:46:28 AM »
steel for me, 1 each trigger guard and 1 each spacer
Logged

Offline LONGTOM

  • Trade Count: (391)
  • Senior Member
  • *****
  • Posts: 4644
  • Gender: Male
  • IF ONLY I COULD GO BACK-I WOULD BE A MOUNTAIN MAN!
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #6 on: July 24, 2012, 07:55:33 AM »
If they are blued steel 3 or 4 of each for me, depending on price.
 
 
 
LONGTOM
Logged
NRA Benefactor Life Member
NAHC Life Member
NRA Member-JAMES MADISON BRIGADE
IWLA Member
NRA/ILA Member
CCRKBA Member
US OLIMPIC SHOOTING TEAM supporter

"THE TREE OF LIBERTY FROM TIME TO TIME MUST BE REFRESHED WITH THE BLOOD OF PATRIOTS AND TYRANTS".
THOMAS JEFFERSON

That my two young sons may never have to know the horrors of war. 

I will stand for your rights as my forefathers did before me!
My thanks to those who have, are and will stand for mine!
To those in the military, I salute you!

LONGTOM 9-25-07

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #7 on: July 24, 2012, 09:36:29 AM »
Toth still lists blued steel spacers for $20, best of luck on the trigger guard production, Toth has been the only one to offer a nice TG so far and I think he quit making them.

Tim

http://www.tothtool.com/product_info.php?cPath=22&products_id=29&osCsid=1d901749b8c74a32dbea688fca9a0f53
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline texbiker

  • Trade Count: (2)
  • Member
  • *
  • Posts: 12
  • Gender: Male
  • tanstaafl
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #8 on: July 24, 2012, 06:33:00 PM »
is this still open? 2sets brass
Logged
To compel a man to subsidize with his taxes the propagation of ideas which he disbelieves and abhors is sinful and tyrannical.--Thomas Jefferson

If you don't read the newspaper you are uninformed, if you do read the newspaper you are misinformed.--Mark Twain

Offline Brian56

  • GBO Supporter
  • Trade Count: (5)
  • Member
  • *****
  • Posts: 62
  • Gender: Male
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #9 on: July 24, 2012, 09:01:40 PM »



                        4 sets brass



                                                                                                                            Brian@Remington:
Logged
Brian@Remington

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #10 on: July 24, 2012, 10:46:02 PM »
Two sets brass
Logged
Great men have vision and resolve to make dreams come true.

Offline Libraryhound

  • Trade Count: (2)
  • Member
  • *
  • Posts: 61
  • Gender: Male
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #11 on: July 24, 2012, 11:33:03 PM »
1 set in brass.

Libraryhound
Logged
H&R carbine classic frame with topper deluxe 20ga barrel & 444marlin barrel(pending), Ruger no.3 in 444marlin(pending), Ruger Mark III standard 6", Ruger Super Blackhawk ss. 44mag Talo 3.75", Savage hog hunter 223 rem, Glock 21sf,

Offline thejanitor

  • GBO Supporter
  • Trade Count: (59)
  • Senior Member
  • *****
  • Posts: 1094
  • Gender: Male
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #12 on: July 25, 2012, 12:20:33 AM »
Depending on price, 1 set in Brass maybe 2.  Thanks  thejanitor
Logged

Offline j stuart

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #13 on: July 25, 2012, 09:37:37 AM »
Count me in for one spacer and onetrigger guard  in Steel
Logged

Offline SJB

  • GBO Supporter
  • Trade Count: (3)
  • Member
  • *****
  • Posts: 65
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #14 on: July 25, 2012, 11:40:17 AM »
1 brass set and 2 steel sets
Logged

Offline RPRNY

  • Trade Count: (11)
  • A Real Regular
  • ****
  • Posts: 552
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #15 on: July 25, 2012, 01:33:32 PM »
2 sets brass, 2 sets steel here.
Logged
[spoof]The Handi-Rifle is a highly matrixed, vintage tactical shooting platform allowing operators high interchangeability, extended caliber diversity, and a wide choice of range related optical solutions suited to the demands of their tactical operating environments.  ;) [/spoof]

Offline lrrice

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 194
  • Gender: Male
    • Rice Custom Knives
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #16 on: July 26, 2012, 04:51:18 AM »
1 set in brass
Logged

Offline rmk

  • Trade Count: (1)
  • Member
  • *
  • Posts: 6
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #17 on: July 30, 2012, 08:57:22 PM »
Two of each here. Depending on price naturally.
Logged

Offline KIMBER45

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1648
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #18 on: July 30, 2012, 11:33:27 PM »
1 brass here
Logged
"In the final analysis, it is between you and God.  It was never between you and them anyway."__Mother Theresa
-----------------
Not everyone will understand your journey. That"s fine. It's not their journey to make sense of. It's yours.
--------------------------------
Hawkeye: My father warned me about you...
Chingachgook, he warned me about people like you. He said "Do not try to understand them".
 "do not try to make them understand you. That is because they are a breed apart and make no sense".
-------

-------

Offline rdlange

  • GBO Supporter
  • Trade Count: (52)
  • Senior Member
  • *****
  • Posts: 1122
  • Gender: Male
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #19 on: July 31, 2012, 01:50:56 AM »
One set of each.  More over time...
Logged
Think as if you LIFE depends on it... IT does..!  Be Well...

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #20 on: July 31, 2012, 03:25:25 AM »
Quote from: Graybeard on July 30, 2012, 01:18:31 AM
There will be NO FURTHER discussion of making for profit/buying/selling of these items by folks who are not paid advertisers of this site.
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline SEK_22Hornet

  • GBO Supporter
  • Trade Count: (0)
  • Member
  • *****
  • Posts: 97
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #21 on: August 02, 2012, 04:57:01 PM »
I've been corresponding with Graybeard on this project and I believe he is OK with this project.  This would be a non-profit one time group buy.  The purpose of this thread was to gauge the current interest level, and I'd say the level is high enough to make it worthwhile for someone to program and make a few.  Time will tell if that happens. For the moment, I'll just say we are on hold pending further discussion - I'll post more when there is something to post. Thanks to everyone for the input.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #22 on: August 02, 2012, 06:11:53 PM »
There's no question of demand or interest in the parts,  you're not exactly going down a new path.  ;D

Tim

http://www.gboreloaded.com/forums/index.php/topic,138087.msg1098537958.html#msg1098537958
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline SEK_22Hornet

  • GBO Supporter
  • Trade Count: (0)
  • Member
  • *****
  • Posts: 97
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #23 on: September 03, 2012, 03:29:54 AM »
Nothing new on this yet - still working on it.  I did see a steel spacer listed when I was looking around on Gun Broker last night for $20 (from a previously mentioned vendor). I'll let everyone know if anything comes of this.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #24 on: September 03, 2012, 04:35:48 AM »
Thanks!  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline HuntinandBanjos94

  • Trade Count: (0)
  • Member
  • *
  • Posts: 24
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #25 on: September 03, 2012, 01:22:15 PM »
If this ever takes off, I would like a set in brass. I have looked for a while for a set so I really hope this succeeds.

Thanks,

Travis
Logged

Offline hoytcanon

  • If there is a season for it... I have a pot to cook it in.
  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
  • Handi's and Henry's... a perfect partnership!
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #26 on: September 03, 2012, 02:53:15 PM »
Just in case this deal fly's... I'll take two sets of the spacer/TG in brass and one set of the spacer/TG in blued steel.
Logged
Hoyt Handi's; Ultra Black .22 K-Hornet Shorty, Black Synthetic K-Hornet Shorty & Nickel .410 Combo (sons), Ultra Granite Grey .22 BR Rem, Ultra Nutmeg .223 & .30/30 Shorty Combo (sons), Ultra Forest .223/7mm-08 Shorty Combo, Ultra Forest .243/.308 Combo, Ultra Nutmeg .243/.308 Combo (sons),  Jacaranda/Cocobolo .30/30 & 7.62X39 Shorty Combo, Ultra Black/Stainless .260 Rem Stub, Ultra Black/Stainless .338 Federal Stub,  Ultra Grey .358 Win, Ultra Grey .35 Whelen, Walnut/Cocobolo Mannlicher .357 MAX, Buffalo Classic Mannlicher .44 Mag Shorties w/NDS-38 peeps (X2; Sons & mine), Ultra Grey Stainless .45/70 & .243 & 20 Gauge Combo, Buffalo Classic 26" .45/70, 9.3X74R Mannlicher, Synthetic Nickel .410 & .30/30 & Versa Pak .22 LR Shorty Combo, Ultra Forest/Cocobolo 12 Gauge 3.5" Turkey; Most scoped with DNZ or Dura Sight one-piece bases and Mueller, Hawke or Nikon scopes... several with Skinner Peeps and Williams Fire Sight ramps.

Offline Buster95

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 172
  • Gender: Male
Re: CNC shop found for metal forend spacer and possibly trigger guards
« Reply #27 on: September 16, 2012, 12:26:39 PM »
Depending on price one spacer and one trigger guard  in steel.
Logged
Pages: [1]   Go Up
« previous next »