« previous next »
Pages: [1]   Go Down

Author Topic: Accessory Barrel - Will it Fit?  (Read 350 times)

0 Members and 1 Guest are viewing this topic.

Offline FLS

  • Trade Count: (0)
  • Member
  • *
  • Posts: 14
  • Gender: Male
Accessory Barrel - Will it Fit?
« on: July 30, 2011, 09:46:51 AM »
Do ANY of the accessory barrels fit a Buffalo Classic frame?
 
Logged

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: Accessory Barrel - Will it Fit?
« Reply #1 on: July 30, 2011, 09:53:17 AM »
Read the barrel fitting sticky,it will work
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline keith44

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2748
  • Gender: Male
Re: Accessory Barrel - Will it Fit?
« Reply #2 on: July 30, 2011, 09:53:47 AM »
There has been a discussion on fitting barrels to the BC, the fore arm stock must be altered, if I remember correctly.  Other than that it's just like any other barrel swap.  Why would you want to change from .45-70 to a .444?  The .45-70 will do everything the .444 will and more, with hand loads.
Logged
keep em talkin' while I reload
Life member NRA

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: Accessory Barrel - Will it Fit?
« Reply #3 on: July 30, 2011, 09:55:29 AM »
Yes, the BC frame is the same as any other SB2 frame, just has a fake case coloring applied to it, as long as the serial number starts with N or H, H&R will fit accessory barrels to it. We don't allow buying/selling/trading in discussion forums, that's what the classifieds are for.  ;)

Quote from: keith44 on July 30, 2011, 09:53:47 AM
There has been a discussion on fitting barrels to the BC, the fore arm stock must be altered, if I remember correctly.

The forend needs no alteration............ unless the new barrel it too short for the BC forend! Pic below is a 22" 45-70 Handi barrel on one of my BC frames.

Tim

http://www.hr1871.com/Support/accessoryProgram.asp
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »