PawPaw,
Appreciate the input. Indiana's law is written to allow for modified, or wildcat cartridges. They simply have to be more than .357 diameter, and fall within minimum and maximum lengths.
I don't know if cutting the .35 down to 1.8" will be likely adversely affect accuracy.
I have a .357 that I've reamed to max, so I'll likely use it this year, but would like other opinions on possibly using the .35 Rem in a shortened case.
Shortening the case shouldn't affect accuracy, as long as you have enough neck to hold the cartridge. We generally consider that a neck is long enough if it's one caliber long. Additionally, you can seat the bullet out, if you have enough bullet and enough neck.
For example. When we're out of .357 Magnum brass, we can load .38 Special brass to .357 lengths with no loss of power or accuracy.
Trim your brass to the length required by law, then load the cartridge to the standard OAL. The rifle won't know that the brass has been trimmed and the bullet will start its trip at the same place in the throat. If my figures are correct, the case is 1.920 long and the neck is 0.336, which isn't optimum, but seems to work fine for the caliber.
Trim the case to 1.800, the seat a couple of bullets and see if they're stable in the case.
One consideration is which rifle you're going to use. If for the Handi, no problem, but if they're for a lever gun, I'd apply a nice crimp.