Hello Everyone...

[Savage_Jake]

I am proud to say that I am an owner of a new Savage 111FCXP3 .30-06
I have always wanted an accurate high powered rifle.
It came with a 2 piece mount system so I was unable to mount my scope. There was not enough area on the scope to move the rings for proper mounting. I ordered a one piece B-Square.

[bill439]

You have done well, the Savage is a great rifle and the 30-06 is well, it is what it is--" all American "
Best of luck, Bill439

[Harry Snippe]

I am proud to say that I am an owner of a new Savage 111FCXP3 .30-06
I have always wanted an accurate high powered rifle.
It came with a 2 piece mount system so I was unable to mount my scope. There was not enough area on the scope to move the rings for proper mounting. I ordered a one piece B-Square.

You did not say why the scope would not fit your rifle . Was it a matter of spacing or was the bell of the scope too large to clear the barrel  . It it was spacing  then an extended ring would have solved the problem .

[Savage_Jake]

You did not say why the scope would not fit your rifle . Was it a matter of spacing or was the bell of the scope too large to clear the barrel  . It it was spacing  then an extended ring would have solved the problem .

It was the space between mounts. They are too far apart. You can see in the pic what I am talking about. I read that this is a common problem for some to gain the correct eye relief.



As you can see, there is not enough space on the tube to move the rings.
Hopefully the 1 piece with resolve this problem. I dont have money for a new scope at the moment.

Here is the link to the B-Square mount.
http://www.midwayusa.com/viewProduct/?productNumber=199583

[LaOtto222]

I have used those mounts on a short action Stevens. You may still have to move your rings some to get your eye relief correct, but they should work. Good Luck and Good Shooting

[Harry Snippe]

[.
[/quote]

It was the space between mounts. They are too far apart. You can see in the pic what I am talking about. I read that this is a common problem for some to gain the correct eye relief.



As you can see, there is not enough space on the tube to move the rings.
Hopefully the 1 piece with resolve this problem. I dont have money for a new scope at the moment.

Here is the link to the B-Square mount.
http://www.midwayusa.com/viewProduct/?productNumber=199583
[/quote]
.

Yes I see where your coming from Hope the one piece base solves your problem . Still you might need to move the rings to fit and worse get an extended ring.All the best
Happy

[Savage_Jake]

I'm pretty confident the one piece will work just fine.
Its just driving me nuts waiting for it to get here.
I had sold some stuff on ebay to pay for it. So I had to wait for the money from paypal to transfer to my checking account.
Now I have to wait for the mount to arrive.
I JUST WANT TO SHOOT MY NEW RIFLE!!!!!   

[Savage_Jake]

Well I received the mount base today and unfortunately its the wrong on.
I need the ROUND REAR. Not the FLAT REAR.
Natchez has the wrong wording on their site.
Oh well. Its going back to Natchez so they can send the right one.