« previous next »
Pages: [1]   Go Down

Author Topic: savage 24f aftermarket stocks?  (Read 1436 times)

0 Members and 1 Guest are viewing this topic.

Offline snowman485

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
savage 24f aftermarket stocks?
« on: March 18, 2005, 03:43:32 AM »
Hi I have a savage 24f in 22hornet/20ga. The stock is to long for my taste and was wondering if there are aftermarket stocks for them . The stock has a 1inch screw on butt plate ,are there just flat plates available for it to shorten the length of pull up? Thanks for any help given ,Snowman485  :D
Logged

Offline yellowknifedave

  • Trade Count: (0)
  • Member
  • *
  • Posts: 85
butt stock
« Reply #1 on: March 18, 2005, 12:30:51 PM »
Howdy.  A friend of mine wanted to buy wood stocks for his 24 f in the same combination.  He ordered it from Boyds.  The stocks are beautiful pieces of wood, however, they do not fit his 24f.  They are probably for a 24V.  That is my only experience with aftermarket stocks for the 24f.  Just thought I would share it with you.
YKD
Logged

Offline alsaqr

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1270
Re: savage 24f aftermarket stocks?
« Reply #2 on: April 03, 2007, 05:32:37 AM »
Those stocks are too long.  Cut mine off 1/2 inch and it was still too long.  Cut another 1/2 inch off and it is now just right.  Take a piece of masking tape and put it around the stock where you want to shorten it.  Then cut it off on the taped line with a hacksaw.  Re-attach the butt plate.  It will be too big.  Put masking tape around the stock and sand the butt plate down to fit with a sander.  The masking tape will protect the stock while sanding.
Logged
Pages: [1]   Go Up
« previous next »