Author Topic: Case trimming for .204  (Read 2663 times)

0 Members and 1 Guest are viewing this topic.

Offline Bison Butt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 46
Case trimming for .204
« on: March 18, 2008, 05:56:10 AM »
I ordered a .204 barrel and I am getting the equipment to reload. I called Lee Precision and they do not make a case trimmer for that caliber.
 What are others doing to trim cases? Lee is a simple apparatus that I have used for about six calibers.

Thanks in advance.

BB

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43294
  • Gender: Male
Re: Case trimming for .204
« Reply #1 on: March 18, 2008, 06:13:33 AM »
Buy a Lee 22-250 case length gauge, chuck it in a drill and use a file on it to reduce it to .204", you'll have to do half at a time, then swap ends.  Then trim the pilot end so it trims to the appropriate length. You'll need a .223 lock stud shell holder too if you don't already have one.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Bison Butt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 46
Re: Case trimming for .204
« Reply #2 on: March 18, 2008, 06:27:14 AM »
Boy that was simple. Thanks Tim.

 That  is the same solution I used for my 40/65 six or seven years ago, and I forgot. I had to use a 45/70 and turn it down. OH boy!! The miles are making a difference. CRS !!!!!


BB

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Case trimming for .204
« Reply #3 on: March 18, 2008, 07:02:35 AM »
I don't believe the teeth on the cutter go small enough for a .20, I know that they don't go small enough for a .17.  Take the stud out and put a neck up to the cutter end and see if it will work.  Larry
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43294
  • Gender: Male
Re: Case trimming for .204
« Reply #4 on: March 18, 2008, 07:09:40 AM »
It works fine on the .204 or I wouldn't have posted it!! ::)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline njanear

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 207
  • Gender: Male
    • www.geocities.com/njanear13
Re: Case trimming for .204
« Reply #5 on: March 18, 2008, 02:30:58 PM »
It works fine on the .204 or I wouldn't have posted it!! ::)

Tim

Tim:   Why isn't this in the FAQ?    ;D
Njanear 
    12B/21B - Combat Engineer, the way to B           1985 - 1996 GaARNG
Atlanta, GA

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43294
  • Gender: Male
Re: Case trimming for .204
« Reply #6 on: March 18, 2008, 03:03:32 PM »
It's in there now, thanks!!  ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline aulrich

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 678
Re: Case trimming for .204
« Reply #7 on: March 20, 2008, 04:46:46 AM »
I can confirm this it does work, one thing to note, in my case the pilot slipped inside of the cutters, I did not notice it when I trimmed the cutter when I installed that pilot the next time I bottomed it out and cut some really short necks. Since I did not really like how that pilot turned out I re-did it and before I trimmed I expoxied the cutter and pilot together. it has been working fin since.
The second mouse gets the cheese

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43294
  • Gender: Male
Re: Case trimming for .204
« Reply #8 on: March 20, 2008, 05:01:39 AM »
A wrap of copper wire around the threaded end will work as a shim if a trimmer is too short, I had to do that to trim the long Starline 38-55 brass.  ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline statelinerut

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 335
Re: Case trimming for .204
« Reply #9 on: March 21, 2008, 04:08:52 PM »
Tim.....YOU ARE THE MAN!

Thanks for the write up in the FAQ's.

Lee
"For it is the God who commanded light to shine out of darkness, who has shone in our hearts to give the light of the knowledge of the glory of God in the face of Jesus Christ." 2 Corinthians 4:6

"Upon a life I did not live, upon a death I did not die; anothers life, anothers death, I stake my whole eternity." Horatius Bonar